Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Computational fluid dynamics analysis of a combined three-bucket Savonius and three-bladed Darrieus rotor at various overlap conditions
In this paper, a computational fluid dynamics analysis using the FLUENT package 6.2 was carried out to predict the performance characteristics such as power coefficient (Cp), torque coefficient (Ct), and tip speed ratio of a combined three-bucket Savonius and three-bladed Darrieus rotor for various overlap conditions, namely, 16.2&percent;, 20&percent;, 25&percent;, 30&percent;, and 35&percent;. In the upper part of the rotor model, there was a three-bucket Savonius rotor of bucket diameter of 8 cm and height of 10 cm, whereas, in the lower part, there was a three-bladed Darrieus rotor of blade diameter of 8 cm and height of 10 cm. A two-dimensional unstructured computational grid was developed for the combined Savonius–Darrieus rotor model. A k-&Vegr; turbulence closure model with enhanced wall treatment function was chosen. A first-order upwind discretization scheme was adopted for pressure-velocity coupling of the flow. The values of Cp and Ct obtained computationally were then compared with those of the values of Cp and Ct obtained experimentally for all the overlap conditions. The experimental values of Cp and Ct for different overlap conditions were obtained from the tests conducted previously in an open-circuit subsonic wind tunnel available in the department. The comparison of experimental and computational studies is quite encouraging.
Computational fluid dynamics analysis of a combined three-bucket Savonius and three-bladed Darrieus rotor at various overlap conditions
In this paper, a computational fluid dynamics analysis using the FLUENT package 6.2 was carried out to predict the performance characteristics such as power coefficient (Cp), torque coefficient (Ct), and tip speed ratio of a combined three-bucket Savonius and three-bladed Darrieus rotor for various overlap conditions, namely, 16.2&percent;, 20&percent;, 25&percent;, 30&percent;, and 35&percent;. In the upper part of the rotor model, there was a three-bucket Savonius rotor of bucket diameter of 8 cm and height of 10 cm, whereas, in the lower part, there was a three-bladed Darrieus rotor of blade diameter of 8 cm and height of 10 cm. A two-dimensional unstructured computational grid was developed for the combined Savonius–Darrieus rotor model. A k-&Vegr; turbulence closure model with enhanced wall treatment function was chosen. A first-order upwind discretization scheme was adopted for pressure-velocity coupling of the flow. The values of Cp and Ct obtained computationally were then compared with those of the values of Cp and Ct obtained experimentally for all the overlap conditions. The experimental values of Cp and Ct for different overlap conditions were obtained from the tests conducted previously in an open-circuit subsonic wind tunnel available in the department. The comparison of experimental and computational studies is quite encouraging.
Computational fluid dynamics analysis of a combined three-bucket Savonius and three-bladed Darrieus rotor at various overlap conditions
Debnath, Biplab Kumar (Autor:in) / Biswas, Agnimitra (Autor:in) / Gupta, Rajat (Autor:in)
Journal of Renewable and Sustainable Energy ; 1 ; 033110-
01.05.2009
13 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Computational fluid dynamics analysis of a twisted three-bladed H-Darrieus rotor
| American Institute of Physics | 2010
| American Institute of Physics | 2010
Unsteady aerodynamics of a twist bladed H-Darrieus rotor in low Reynolds number flow
| American Institute of Physics | 2014