Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Optimum Use of Sugar Cane Straw Ash in Alkali-Activated Binders Based on Blast Furnace Slag
Alkali-activated binders (AABs) are a material obtained from the combination of a solid precursor and an alkaline activating solution. In this study, one solid precursor used was blast-furnace slag (BFS) and the other was an agro waste: sugar cane straw ash (SCSA). Sodium hydroxide was used for preparing activating solutions. In order to reach the potential reactivity of the SCSA, a study varying the BFS/SCSA mass ratio and molar ratio was carried out. The BFS/SCSA ratio varied from to , and was studied in the range of 11.1–18.5. To fulfill this objective, specimens were assessed by their compressive strength of mortars and microstructural studies of pastes [X-ray diffraction (XRD); thermogravimetric analysis (TGA); Fourier transform infrared spectroscopy (FTIR); and field emission scanning electron microscopy (FESEM)] in the curing time range of 3–90 days at 25°C. Results from these tests showed that the best BFS/SCSA and ratios were and 18.5, respectively. This study revealed an interesting valorization of the SCSA as a complementary precursor in BFS-based AABs because of the improvement of mechanical properties and the reduction in the consumption of BFS in AAB.
Optimum Use of Sugar Cane Straw Ash in Alkali-Activated Binders Based on Blast Furnace Slag
Alkali-activated binders (AABs) are a material obtained from the combination of a solid precursor and an alkaline activating solution. In this study, one solid precursor used was blast-furnace slag (BFS) and the other was an agro waste: sugar cane straw ash (SCSA). Sodium hydroxide was used for preparing activating solutions. In order to reach the potential reactivity of the SCSA, a study varying the BFS/SCSA mass ratio and molar ratio was carried out. The BFS/SCSA ratio varied from to , and was studied in the range of 11.1–18.5. To fulfill this objective, specimens were assessed by their compressive strength of mortars and microstructural studies of pastes [X-ray diffraction (XRD); thermogravimetric analysis (TGA); Fourier transform infrared spectroscopy (FTIR); and field emission scanning electron microscopy (FESEM)] in the curing time range of 3–90 days at 25°C. Results from these tests showed that the best BFS/SCSA and ratios were and 18.5, respectively. This study revealed an interesting valorization of the SCSA as a complementary precursor in BFS-based AABs because of the improvement of mechanical properties and the reduction in the consumption of BFS in AAB.
Optimum Use of Sugar Cane Straw Ash in Alkali-Activated Binders Based on Blast Furnace Slag
de Moraes, João Claudio Bassan (Autor:in) / Tashima, Mauro Mitsuuchi (Autor:in) / Melges, José Luiz Pinheiro (Autor:in) / Akasaki, Jorge Luís (Autor:in) / Monzó, José (Autor:in) / Borrachero, Maria Victoria (Autor:in) / Soriano, Lourdes (Autor:in) / Payá, Jordi (Autor:in)
20.03.2018
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Optimum Use of Sugar Cane Straw Ash in Alkali-Activated Binders Based on Blast Furnace Slag
| British Library Online Contents | 2018
| British Library Online Contents | 2017