Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Data Compilation from Large Drained Compression Triaxial Tests on Coarse Crushable Rockfill Materials
Investigating the mechanical properties of rockfills requires laborious, time-consuming, and expensive large-scale testing. Therefore, practitioners frequently adopt design parameters based on a limited number of reports with experimental results. With the aim of enlarging and consolidating the database on the mechanical behavior of coarse rockfills, this paper compiles 158 drained triaxial compression tests conducted on 33 different materials, performed on samples in diameter and having a maximum particle size between 100 and 200 mm. Data are analyzed in terms of particle breakage, shear strength, and stiffness. The results are compared with limits for high and low shear strength previously reported. At confining pressures lower than 0.2 MPa, rockfills consistently have a maximum internal friction angle higher than 45°; at high pressure, this value decreases to a range between 30° and 40°, mainly due to degradation caused by particle breakage. Average secant Young’s moduli for all uniform and well-graded rockfills analyzed are in the typical range for loose sands, characterized by a normalized secant modulus of 100 to 200.
Data Compilation from Large Drained Compression Triaxial Tests on Coarse Crushable Rockfill Materials
Investigating the mechanical properties of rockfills requires laborious, time-consuming, and expensive large-scale testing. Therefore, practitioners frequently adopt design parameters based on a limited number of reports with experimental results. With the aim of enlarging and consolidating the database on the mechanical behavior of coarse rockfills, this paper compiles 158 drained triaxial compression tests conducted on 33 different materials, performed on samples in diameter and having a maximum particle size between 100 and 200 mm. Data are analyzed in terms of particle breakage, shear strength, and stiffness. The results are compared with limits for high and low shear strength previously reported. At confining pressures lower than 0.2 MPa, rockfills consistently have a maximum internal friction angle higher than 45°; at high pressure, this value decreases to a range between 30° and 40°, mainly due to degradation caused by particle breakage. Average secant Young’s moduli for all uniform and well-graded rockfills analyzed are in the typical range for loose sands, characterized by a normalized secant modulus of 100 to 200.
Data Compilation from Large Drained Compression Triaxial Tests on Coarse Crushable Rockfill Materials
Ovalle, Carlos (Autor:in) / Linero, Sandra (Autor:in) / Dano, Christophe (Autor:in) / Bard, Edgar (Autor:in) / Hicher, Pierre-Yves (Autor:in) / Osses, Rodrigo (Autor:in)
27.06.2020
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Particle breakage of artificially crushable materials subject to drained cyclic triaxial loading
| British Library Online Contents | 2016
Particle breakage of artificially crushable materials subject to drained cyclic triaxial loading
| British Library Online Contents | 2016
Particle breakage of artificially crushable materials subject to drained cyclic triaxial loading
| Online Contents | 2016
Viscosity of Round Granular Materials in Drained Triaxial Compression
| British Library Conference Proceedings | 2007