Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Coupled FDM–DEM Method for Analyzing EPBS Machine Tunneling Performance in Boulders
https://orcid.org/0000-0002-2414-0185
https://orcid.org/0000-0003-1587-4117
This work focuses on the development of a three-dimensional shield tunneling model coupling the finite-difference method (FDM) with the discrete-element method (DEM) and evaluates its tunneling performance in boulders. The tunneling process of cutterhead rotation, cutting the formation, soil entering the chamber, and discharging of the screw conveyor is simulated to explain the characteristics of particle movement in front of the tunnel face. The range of the soil failure zone under different shield discharge ratios is determined by the correlation between the discharge ratio and the tunnel surface stability. The evolution process of the soil arching effect in the boulders along with shield tunneling is investigated to understand the mechanisms of the delay settlement in the boulders. Subsequently, the shield discharge ratio is optimized by investigating its influence on the surface deformation. Finally, the average stress distribution on the shield cutterhead in the tunneling process is analyzed to provide the scheme of the cutterhead structure and arrangement. This work can be referred for evaluating the shield tunneling performance and optimizing the excavation design scheme of shield machines during tunneling construction under similar geological conditions.
The coupled finite-difference method (FDM)–discrete-element method (DEM) calculation method proposed in this study was successfully applied for boring tunnel equipment performance analysis in Beijing Metro Line 16. This shield tunnel was excavated in the strata with boulders rich in large size and high strength, and the previous tunneling experience shows that the shield is prone to encountering accidents such as tool damage and cutterhead jamming by large boulders when tunneling in such strata. Based on the present parametric analysis and calculation results, the suitable engineering suggestions have been proposed to enhance the shield equipment specifically, such as strengthening the central and peripheral cutters and the wear resistance of the cutterhead sides. In addition, the cutterhead opening and band-type screw conveyor were also adjusted to allow large size stones to pass through the cutterhead and discharge from the soil chamber as much as possible instead of being broken by the cutters. The adoption of these techniques has made it possible for the earth pressure balance shield (EPBS) machine to continuously excavate 1,300 m in boulders without cutter exchanges.
Coupled FDM–DEM Method for Analyzing EPBS Machine Tunneling Performance in Boulders
https://orcid.org/0000-0002-2414-0185
https://orcid.org/0000-0003-1587-4117
This work focuses on the development of a three-dimensional shield tunneling model coupling the finite-difference method (FDM) with the discrete-element method (DEM) and evaluates its tunneling performance in boulders. The tunneling process of cutterhead rotation, cutting the formation, soil entering the chamber, and discharging of the screw conveyor is simulated to explain the characteristics of particle movement in front of the tunnel face. The range of the soil failure zone under different shield discharge ratios is determined by the correlation between the discharge ratio and the tunnel surface stability. The evolution process of the soil arching effect in the boulders along with shield tunneling is investigated to understand the mechanisms of the delay settlement in the boulders. Subsequently, the shield discharge ratio is optimized by investigating its influence on the surface deformation. Finally, the average stress distribution on the shield cutterhead in the tunneling process is analyzed to provide the scheme of the cutterhead structure and arrangement. This work can be referred for evaluating the shield tunneling performance and optimizing the excavation design scheme of shield machines during tunneling construction under similar geological conditions.
The coupled finite-difference method (FDM)–discrete-element method (DEM) calculation method proposed in this study was successfully applied for boring tunnel equipment performance analysis in Beijing Metro Line 16. This shield tunnel was excavated in the strata with boulders rich in large size and high strength, and the previous tunneling experience shows that the shield is prone to encountering accidents such as tool damage and cutterhead jamming by large boulders when tunneling in such strata. Based on the present parametric analysis and calculation results, the suitable engineering suggestions have been proposed to enhance the shield equipment specifically, such as strengthening the central and peripheral cutters and the wear resistance of the cutterhead sides. In addition, the cutterhead opening and band-type screw conveyor were also adjusted to allow large size stones to pass through the cutterhead and discharge from the soil chamber as much as possible instead of being broken by the cutters. The adoption of these techniques has made it possible for the earth pressure balance shield (EPBS) machine to continuously excavate 1,300 m in boulders without cutter exchanges.
Coupled FDM–DEM Method for Analyzing EPBS Machine Tunneling Performance in Boulders
https://orcid.org/0000-0002-2414-0185
https://orcid.org/0000-0003-1587-4117
This work focuses on the development of a three-dimensional shield tunneling model coupling the finite-difference method (FDM) with the discrete-element method (DEM) and evaluates its tunneling performance in boulders. The tunneling process of cutterhead rotation, cutting the formation, soil entering the chamber, and discharging of the screw conveyor is simulated to explain the characteristics of particle movement in front of the tunnel face. The range of the soil failure zone under different shield discharge ratios is determined by the correlation between the discharge ratio and the tunnel surface stability. The evolution process of the soil arching effect in the boulders along with shield tunneling is investigated to understand the mechanisms of the delay settlement in the boulders. Subsequently, the shield discharge ratio is optimized by investigating its influence on the surface deformation. Finally, the average stress distribution on the shield cutterhead in the tunneling process is analyzed to provide the scheme of the cutterhead structure and arrangement. This work can be referred for evaluating the shield tunneling performance and optimizing the excavation design scheme of shield machines during tunneling construction under similar geological conditions.
The coupled finite-difference method (FDM)–discrete-element method (DEM) calculation method proposed in this study was successfully applied for boring tunnel equipment performance analysis in Beijing Metro Line 16. This shield tunnel was excavated in the strata with boulders rich in large size and high strength, and the previous tunneling experience shows that the shield is prone to encountering accidents such as tool damage and cutterhead jamming by large boulders when tunneling in such strata. Based on the present parametric analysis and calculation results, the suitable engineering suggestions have been proposed to enhance the shield equipment specifically, such as strengthening the central and peripheral cutters and the wear resistance of the cutterhead sides. In addition, the cutterhead opening and band-type screw conveyor were also adjusted to allow large size stones to pass through the cutterhead and discharge from the soil chamber as much as possible instead of being broken by the cutters. The adoption of these techniques has made it possible for the earth pressure balance shield (EPBS) machine to continuously excavate 1,300 m in boulders without cutter exchanges.
Coupled FDM–DEM Method for Analyzing EPBS Machine Tunneling Performance in Boulders
Int. J. Geomech.
Shao, Xiaokang (Autor:in) / Yang, Zhiyong (Autor:in) / Jiang, Yusheng (Autor:in) / Feng, Jili (Autor:in)
01.12.2022
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Control of Ground Settlements Caused by EPBS Tunneling Using an Intelligent Predictive Model
| Online Contents | 2018
Control of Ground Settlements Caused by EPBS Tunneling Using an Intelligent Predictive Model
| Springer Verlag | 2017
Three-Dimensional Face Stability Analysis of EPBS Tunnels
| Trans Tech Publications | 2011
Coping with Boulders in Soft Ground TBM Tunneling
| British Library Conference Proceedings | 2001