Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Evaluation of the Deformation of a Geosynthetic-Reinforced Soil Bridge Abutment
As an alternative to bridges with rigid foundation systems, departments of transportation have begun implementing geosynthetic-reinforced soil (GRS) in an integrated bridge system (IBS) in bridge abutments over the last 20 years. GRS systems are used because they show some advantages over more conventional bridge designs. These advantages include low cost, short building time, and reduction of the relative settlement between bridge deck and approach embankments. GRS-IBS systems deal with the "bump at the end of the bridge" problem by allowing both the bridge deck and approaching road to settle or deform at the same rate, instead of resisting it. This paper focuses on documenting the performance of a GRS-IBS system, by studying a short-span bridge located on State Highway 40, southwest of Bloomer, Wisconsin. This bridge was built during the summer of 2012 and is being monitored for two years to track deformations caused by service and environmental loads. The monitoring campaign consists of surveying the foundation, abutment walls, bridge deck, approaching roads, and creek erosion. Preliminary results show that the GRS-IBS system has performed as expected, showing no differential settlement, thus solving the "bump at the end of the bridge" problem with a simple, cost-effective solution.
Evaluation of the Deformation of a Geosynthetic-Reinforced Soil Bridge Abutment
As an alternative to bridges with rigid foundation systems, departments of transportation have begun implementing geosynthetic-reinforced soil (GRS) in an integrated bridge system (IBS) in bridge abutments over the last 20 years. GRS systems are used because they show some advantages over more conventional bridge designs. These advantages include low cost, short building time, and reduction of the relative settlement between bridge deck and approach embankments. GRS-IBS systems deal with the "bump at the end of the bridge" problem by allowing both the bridge deck and approaching road to settle or deform at the same rate, instead of resisting it. This paper focuses on documenting the performance of a GRS-IBS system, by studying a short-span bridge located on State Highway 40, southwest of Bloomer, Wisconsin. This bridge was built during the summer of 2012 and is being monitored for two years to track deformations caused by service and environmental loads. The monitoring campaign consists of surveying the foundation, abutment walls, bridge deck, approaching roads, and creek erosion. Preliminary results show that the GRS-IBS system has performed as expected, showing no differential settlement, thus solving the "bump at the end of the bridge" problem with a simple, cost-effective solution.
Evaluation of the Deformation of a Geosynthetic-Reinforced Soil Bridge Abutment
Garnier-Villarreal, Maximiliano (Autor:in) / Fratta, Dante (Autor:in) / Oliva, Michael (Autor:in)
Geo-Congress 2014 ; 2014 ; Atlanta, Georgia
Geo-Congress 2014 Technical Papers ; 4191-4202
24.02.2014
Aufsatz (Konferenz)
Elektronische Ressource
Englisch
Evaluation of the Deformation of a Geosynthetic-Reinforced Soil Bridge Abutment
| British Library Conference Proceedings | 2014
Geosynthetic Reinforced Soil Walls As Integral Bridge Abutment Walls
| British Library Conference Proceedings | 2010
Construction of a Geosynthetic-Reinforced Soil Bridge Abutment in Slovenia
| Springer Verlag | 2021