Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Detection of Top-Bar Effect in Reinforced Concrete Using Guided Ultrasonic Waves
An ultrasonic shear wave-based nondestructive method is proposed in this paper to detect steel–concrete interface debonding owing to the top-bar effect. A concrete wall was cast with horizontal reinforcements at different heights in order to create interfacial defects underneath the top bars. Lead zirconate titanate (PZT) patches were surface mounted at the ends of the bars to excite and record shear waves. The ultrasonic results showed that the amplitude of the signals increased with the height of the bars. The specimens were cut open after the experiments and the top-bar effect was clearly discerned. Its increase with the height of the bar was clearly observed. An increasing difference between the high-frequency component (HFC) and the excitation frequency of the signal was observed between the bottom bar with a good bond and the top bars. This feature can be utilized for nondestructively monitoring the top-bar effect.
Detection of Top-Bar Effect in Reinforced Concrete Using Guided Ultrasonic Waves
An ultrasonic shear wave-based nondestructive method is proposed in this paper to detect steel–concrete interface debonding owing to the top-bar effect. A concrete wall was cast with horizontal reinforcements at different heights in order to create interfacial defects underneath the top bars. Lead zirconate titanate (PZT) patches were surface mounted at the ends of the bars to excite and record shear waves. The ultrasonic results showed that the amplitude of the signals increased with the height of the bars. The specimens were cut open after the experiments and the top-bar effect was clearly discerned. Its increase with the height of the bar was clearly observed. An increasing difference between the high-frequency component (HFC) and the excitation frequency of the signal was observed between the bottom bar with a good bond and the top bars. This feature can be utilized for nondestructively monitoring the top-bar effect.
Detection of Top-Bar Effect in Reinforced Concrete Using Guided Ultrasonic Waves
Wang, Yikuan (Autor:in) / Mukherjee, Abhijit (Autor:in) / Castel, Arnaud (Autor:in)
30.01.2021
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Ultrasonic guided waves for reinforced plastics safety
| British Library Online Contents | 2017
Numerical Simulation of Monitoring Corrosion in Reinforced Concrete Based on Ultrasonic Guided Waves
| DOAJ | 2014
| DOAJ | 2020
Guided waves for damage detection in rebar-reinforced concrete beams
| Online Contents | 2013
Guided waves for damage detection in rebar-reinforced concrete beams
| Elsevier | 2013