Axial Resistance of Pipelines with Enlarged Joints: Fid-Bau Portal

Axial Resistance of Pipelines with Enlarged Joints

Rose, Hailey-Rae / Wham, Brad P. / Dashti, Shideh / Liel, Abbie

Buried pipelines subjected to permanent ground deformations (through, e.g., earthquake-induced liquefaction or fault rupture) often experience widespread damage. Regardless of the direction of ground movement, pipelines tend to respond and experience damage axially due to their directional stiffness characteristics. In addition, case studies and previous testing have shown that damage is concentrated at the pipe joints due to their lower strength compared with a pipe barrel. Previous testing has also shown that axial forces increase significantly when pipe connections have jointing mechanisms, such as coupling restraints, with larger diameters than the pipe barrel alone. These enlarged joints act as anchors along the pipe, increasing the soil resistance at these locations. Current methods for predicting the axial force along a pipe underpredict the force demands and oversimplify the mechanics of soil resistance on the joint face. This study conducts a series of 12 pipe-pull tests in a centrifuge, varying joint diameter and burial depth, to quantify the axial forces developed. A strong linear correlation was observed between the soil resistance on a joint face and the joint surface area and burial depth. The study also proposes an analytical solution based on pullout capacity design equations for vertical anchor plates as a function of soil and pipe joint properties. The proposed solution to calculate joint resistance is in good agreement with the centrifuge tests performed for this study and previous full- and model-scale experiments. The proposed prediction equation is anticipated to have future applications to other buried structures because it is based on mechanisms of passive resistance commonly encountered in underground structures and lifelines.