Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Design Wind Loads Including Torsion for Rectangular Buildings with Horizontal Aspect Ratio of 1.6
Limited information is available regarding wind-induced torsional loads on buildings. This paper presents results of tests carried out in a boundary-layer wind tunnel using building models with the same plan dimensions (aspect ratio of 1.6) and located in a simulated open terrain exposure for different wind directions. Synchronized wind pressure measurements allowed estimating instantaneous base-shear forces and torsional moments on the tested rigid building models. Results were normalized and presented in terms of shear and torsional coefficients for two load cases, namely: maximum torsion and corresponding shear, and maximum shear and corresponding torsion. Comparison of the wind-tunnel test results with current torsion- and shear-related provisions in the American standard demonstrates good agreement for low-rise buildings but differences for medium-rise buildings.
Design Wind Loads Including Torsion for Rectangular Buildings with Horizontal Aspect Ratio of 1.6
Limited information is available regarding wind-induced torsional loads on buildings. This paper presents results of tests carried out in a boundary-layer wind tunnel using building models with the same plan dimensions (aspect ratio of 1.6) and located in a simulated open terrain exposure for different wind directions. Synchronized wind pressure measurements allowed estimating instantaneous base-shear forces and torsional moments on the tested rigid building models. Results were normalized and presented in terms of shear and torsional coefficients for two load cases, namely: maximum torsion and corresponding shear, and maximum shear and corresponding torsion. Comparison of the wind-tunnel test results with current torsion- and shear-related provisions in the American standard demonstrates good agreement for low-rise buildings but differences for medium-rise buildings.
Design Wind Loads Including Torsion for Rectangular Buildings with Horizontal Aspect Ratio of 1.6
Elsharawy, Mohamed (Autor:in) / Galal, Khaled (Autor:in) / Stathopoulos, Ted (Autor:in)
13.12.2013
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Design Wind Loads Including Torsion for Rectangular Buildings with Horizontal Aspect Ratio of 1.6
| British Library Online Contents | 2014
Design Wind Loads Including Torsion for Rectangular Buildings with Horizontal Aspect Ratio of 1.6
| Online Contents | 2014
Effect of Aspect Ration on Roof Wind Loads of Low-Rise Rectangular Buildings
| British Library Conference Proceedings | 1994
Generation of wind loads on a horizontal grandstand roof of large aspect ratio
| British Library Conference Proceedings | 1995
Wind flow around rectangular obstacles with aspect ratio
| British Library Online Contents | 2009