Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Strength and Plastic Rotation Capacity of I-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
This paper introduces a grid-purlin system, which was composed of secondary rectangular-hollow-section grids welded onto the top flange of I-shaped beams of moment frames. The welded grid-purlin itself may play a role of a lateral bracing member for the welded beam. However, the ultimate strength, plastic rotation capacity, or other structural characteristics of this grid-purlin system remain poorly understood. This paper presents two full-scale cyclic loading tests on specimens with I-shaped beams 700 mm deep, 240 mm wide, and 13 m long. The diagonal length of grids in the square grid-purlin of the specimen was 1.3 m on-center, and two different depths of the sections were selected for the purlin sections. Both specimens successfully achieved fully plastic moments at a plastic rotation exceeding 0.04 rad. This shows that the grid-purlin system provides reliable lateral bracing. Continuum finite-element (CFE) analysis was performed to simulate the hysteretic experimental response of the grid-purlin system. This CFE model was used to examine the plastic rotation capacity for a variety of combinations of I-shaped beams and grid-purlins.
Strength and Plastic Rotation Capacity of I-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
This paper introduces a grid-purlin system, which was composed of secondary rectangular-hollow-section grids welded onto the top flange of I-shaped beams of moment frames. The welded grid-purlin itself may play a role of a lateral bracing member for the welded beam. However, the ultimate strength, plastic rotation capacity, or other structural characteristics of this grid-purlin system remain poorly understood. This paper presents two full-scale cyclic loading tests on specimens with I-shaped beams 700 mm deep, 240 mm wide, and 13 m long. The diagonal length of grids in the square grid-purlin of the specimen was 1.3 m on-center, and two different depths of the sections were selected for the purlin sections. Both specimens successfully achieved fully plastic moments at a plastic rotation exceeding 0.04 rad. This shows that the grid-purlin system provides reliable lateral bracing. Continuum finite-element (CFE) analysis was performed to simulate the hysteretic experimental response of the grid-purlin system. This CFE model was used to examine the plastic rotation capacity for a variety of combinations of I-shaped beams and grid-purlins.
Strength and Plastic Rotation Capacity of I-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
Matsui, Ryota (Autor:in) / Koizumi, Koichi (Autor:in) / Lin, Pao-Chun (Autor:in) / Iwanaga, Masanobu (Autor:in) / Wu, An-Chien (Autor:in) / Takeuchi, Toru (Autor:in) / Tsai, Keh-Chuyan (Autor:in)
08.05.2021
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Plastic Rotation Capacity of I-shaped Beams
| British Library Conference Proceedings | 1997
Purlin holder device for roof purlin installation, roof structure and purlin installation method
| Europäisches Patentamt | 2022
Theoretical analysis of partially restrained zed-purlin beams subjected to up-lift loads
| Online Contents | 2012