Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Tensile Behaviors and Self-Healing of Engineered Cementitious Composite under Sulfate Wet–Dry Cycles
https://orcid.org/0000-0001-8377-7023
This paper investigates the tensile behaviors and self-healing of engineered cementitious composite (ECC) under sulfate wet–dry cycles to reflect the durability. Four pretensile strain levels of 0%, 1%, 1.5%, and 2% were designed. The uniaxial tensile test, three-point bending test, and single-crack tensile test were performed, along with the microscopic characterizations of scanning electron microscope (SEM) and X-ray diffraction (XRD). The results indicated that the sulfate wet–dry cycle exposure had a positive effect on the tensile strength and initial cracking strength of the uncracked ECC, while that was negative on the tensile strain capacity. The insufficient margin of the and indices explained the lower tensile strain. The tensile strength and initial cracking strength of the cracked ECC with 1% pretensile strain surpassed those of the uncracked ECC after undergoing 80 sulfate wet–dry cycles (80 C), while that did not hold for the other cracked ECCs. All the cracked ECCs showed a similar tensile strain after undergoing 80 C. The crack with a width of less than 100 μm achieved complete self-healing. The self-healing products of ECC under sulfate wet–dry cycle exposure may comprise of calcium (alumino) silicate hydrate [C-(A)-S-H] gel, calcite, ettringite, and gypsum. The current findings could offer reference points for applying ECC use in coastal regions.
Tensile Behaviors and Self-Healing of Engineered Cementitious Composite under Sulfate Wet–Dry Cycles
https://orcid.org/0000-0001-8377-7023
This paper investigates the tensile behaviors and self-healing of engineered cementitious composite (ECC) under sulfate wet–dry cycles to reflect the durability. Four pretensile strain levels of 0%, 1%, 1.5%, and 2% were designed. The uniaxial tensile test, three-point bending test, and single-crack tensile test were performed, along with the microscopic characterizations of scanning electron microscope (SEM) and X-ray diffraction (XRD). The results indicated that the sulfate wet–dry cycle exposure had a positive effect on the tensile strength and initial cracking strength of the uncracked ECC, while that was negative on the tensile strain capacity. The insufficient margin of the and indices explained the lower tensile strain. The tensile strength and initial cracking strength of the cracked ECC with 1% pretensile strain surpassed those of the uncracked ECC after undergoing 80 sulfate wet–dry cycles (80 C), while that did not hold for the other cracked ECCs. All the cracked ECCs showed a similar tensile strain after undergoing 80 C. The crack with a width of less than 100 μm achieved complete self-healing. The self-healing products of ECC under sulfate wet–dry cycle exposure may comprise of calcium (alumino) silicate hydrate [C-(A)-S-H] gel, calcite, ettringite, and gypsum. The current findings could offer reference points for applying ECC use in coastal regions.
Tensile Behaviors and Self-Healing of Engineered Cementitious Composite under Sulfate Wet–Dry Cycles
https://orcid.org/0000-0001-8377-7023
This paper investigates the tensile behaviors and self-healing of engineered cementitious composite (ECC) under sulfate wet–dry cycles to reflect the durability. Four pretensile strain levels of 0%, 1%, 1.5%, and 2% were designed. The uniaxial tensile test, three-point bending test, and single-crack tensile test were performed, along with the microscopic characterizations of scanning electron microscope (SEM) and X-ray diffraction (XRD). The results indicated that the sulfate wet–dry cycle exposure had a positive effect on the tensile strength and initial cracking strength of the uncracked ECC, while that was negative on the tensile strain capacity. The insufficient margin of the and indices explained the lower tensile strain. The tensile strength and initial cracking strength of the cracked ECC with 1% pretensile strain surpassed those of the uncracked ECC after undergoing 80 sulfate wet–dry cycles (80 C), while that did not hold for the other cracked ECCs. All the cracked ECCs showed a similar tensile strain after undergoing 80 C. The crack with a width of less than 100 μm achieved complete self-healing. The self-healing products of ECC under sulfate wet–dry cycle exposure may comprise of calcium (alumino) silicate hydrate [C-(A)-S-H] gel, calcite, ettringite, and gypsum. The current findings could offer reference points for applying ECC use in coastal regions.
Tensile Behaviors and Self-Healing of Engineered Cementitious Composite under Sulfate Wet–Dry Cycles
J. Mater. Civ. Eng.
Kan, Lili (Autor:in) / Dai, Lanqing (Autor:in) / Gan, Yuanqiao (Autor:in) / Xu, Mingfeng (Autor:in) / Peng, Bin (Autor:in) / Wang, Fei (Autor:in)
01.07.2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Autogenous self-healing of engineered cementitious composites under freeze–thaw cycles
| Online Contents | 2012
Autogenous self-healing of engineered cementitious composites under freeze-thaw cycles
| British Library Online Contents | 2012
Autogenous healing of engineered cementitious composites under wet–dry cycles
| British Library Online Contents | 2009
Autogenous healing of engineered cementitious composites under wet–dry cycles
| Online Contents | 2009
Autogenous healing of engineered cementitious composites under wet–dry cycles
| Online Contents | 2009