Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Lateral-Torsional Buckling of Non-Prismatic I-Beams Using FEM Approach
Essential steel components with variable cross-section are fabricated from welded plates, which are primarily employed for the growth of the construction industry in beams according to the stress and stiffness requirements of the structure. Lateral-torsional buckling, in which the beam experiences non-uniform twisting and buckling about its weaker axis, is one of the most common failure modes. This dissertation focuses primarily on the lateral-torsional buckle of non-prismatic I-beams. The development of differential equations for deformation analysis of the non-prismatic beam. ANSYS results and deformation equation results are compared to validate the methodology. Using ANSYS, the lateral torsional buckling of a non-prismatic I-beam section with uniformly distributed load is analyzed. In finite element analyses, the solid element approach is used to determine the lateral buckling load for various cross-sections (β = 0.1 to 1.0) by analyzing their behavior. In addition, a stiffener is used to prevent lateral buckling, and the results are compared to a model without stiffeners.
Lateral-Torsional Buckling of Non-Prismatic I-Beams Using FEM Approach
Essential steel components with variable cross-section are fabricated from welded plates, which are primarily employed for the growth of the construction industry in beams according to the stress and stiffness requirements of the structure. Lateral-torsional buckling, in which the beam experiences non-uniform twisting and buckling about its weaker axis, is one of the most common failure modes. This dissertation focuses primarily on the lateral-torsional buckle of non-prismatic I-beams. The development of differential equations for deformation analysis of the non-prismatic beam. ANSYS results and deformation equation results are compared to validate the methodology. Using ANSYS, the lateral torsional buckling of a non-prismatic I-beam section with uniformly distributed load is analyzed. In finite element analyses, the solid element approach is used to determine the lateral buckling load for various cross-sections (β = 0.1 to 1.0) by analyzing their behavior. In addition, a stiffener is used to prevent lateral buckling, and the results are compared to a model without stiffeners.
Lateral-Torsional Buckling of Non-Prismatic I-Beams Using FEM Approach
MARIAPPAN, Senthilpandian (Autor:in) / SOMASUNDARAM, Karthiyaini (Autor:in) / MUTHUSAMY, Shanmugasundaram (Autor:in) / SIVASUBRAMANI, Deepa Nivethika (Autor:in) / SUPRAKASH, Adapala Sunny (Autor:in) / KOTHANDAPANI, Karthikeyan (Autor:in)
25.08.2023
Materials Science ; Vol. 29 No. 3 (2023); 397-402 ; 2029-7289 ; 1392-1320
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DDC:
690
Lateral-torsional buckling of prismatic beams with continuous top-flange bracing
| Online Contents | 2004
Lateral torsional buckling of glass beams
| British Library Conference Proceedings | 2006