Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Evaluation of energy performance of UBC's residential buildings using actual data
The Canadian residential sector consumes 20 per cent of Canada’s total secondary energy as shown in Figure 1 and there are many residential buildings that are currently being built on UBC campus. All the residential buildings on campus have to be constructed according to UBC’s own building rating system, the Residential Environmental Assessment Program (REAP), to ensure lower consumption of water, energy and other resources and higher-quality indoor environment than buildings that are built without any rating systems. However, REAP is applied during planning and construction phases and hence, it does not always guarantee lower energy consumption in the post-occupancy phase. This project was undertaken to assess the energy performance of UBC’s residential buildings using actual energy consumption data. The primary objective of this study is to analyze electricity and gas consumption of three of UBC’s Faculty and Staff Housing buildings. The main sources for this project are electricity and gas consumption data provided by UBC Utilities, building floor plans from UBC Infrastructure Development, and weather data. The average total energy intensity for the three buildings was found to be 165.4 kWh/m²/yr. For a more detailed break-down of energy analysis, individual suite metering for domestic hot water heating and gas fireplaces would be required. Disclaimer: “UBC SEEDS provides students with the opportunity to share the findings of their studies, as well as their opinions, conclusions and recommendations with the UBC community. The reader should bear in mind that this is a student project/report and is not an official document of UBC. Furthermore readers should bear in mind that these reports may not reflect the current status of activities at UBC. We urge you to contact the research persons mentioned in a report or the SEEDS Coordinator about the current status of the subject matter of a project/report.” ; Applied Science, Faculty of ; Unreviewed ; Graduate
Evaluation of energy performance of UBC's residential buildings using actual data
The Canadian residential sector consumes 20 per cent of Canada’s total secondary energy as shown in Figure 1 and there are many residential buildings that are currently being built on UBC campus. All the residential buildings on campus have to be constructed according to UBC’s own building rating system, the Residential Environmental Assessment Program (REAP), to ensure lower consumption of water, energy and other resources and higher-quality indoor environment than buildings that are built without any rating systems. However, REAP is applied during planning and construction phases and hence, it does not always guarantee lower energy consumption in the post-occupancy phase. This project was undertaken to assess the energy performance of UBC’s residential buildings using actual energy consumption data. The primary objective of this study is to analyze electricity and gas consumption of three of UBC’s Faculty and Staff Housing buildings. The main sources for this project are electricity and gas consumption data provided by UBC Utilities, building floor plans from UBC Infrastructure Development, and weather data. The average total energy intensity for the three buildings was found to be 165.4 kWh/m²/yr. For a more detailed break-down of energy analysis, individual suite metering for domestic hot water heating and gas fireplaces would be required. Disclaimer: “UBC SEEDS provides students with the opportunity to share the findings of their studies, as well as their opinions, conclusions and recommendations with the UBC community. The reader should bear in mind that this is a student project/report and is not an official document of UBC. Furthermore readers should bear in mind that these reports may not reflect the current status of activities at UBC. We urge you to contact the research persons mentioned in a report or the SEEDS Coordinator about the current status of the subject matter of a project/report.” ; Applied Science, Faculty of ; Unreviewed ; Graduate
Evaluation of energy performance of UBC's residential buildings using actual data
09.01.2012
UBC Social Ecological Economic Development Studies (SEEDS) Student Report
Paper
Elektronische Ressource
Englisch
DDC:
690
Assessment of Indoor Air Quality in Residential Buildings of New England through Actual Data
| DOAJ | 2022
Comparing Actual and Designed Water Demand in Australian Multilevel Residential Buildings
| ASCE | 2023