Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Thermal performance improvement of artificially roughened solar air heater
Solar air heaters are useful because they can lessen the need for fossil fuel–powered electricity, thereby lowering emissions and cutting down on energy costs. Experiments were conducted to inspect the thermal performance of a solar air heater with combined ribs and delta-winglet in a single-pass solar air heater. The present goal was boost the thermal performance of a solar air collector. A constant relative roughness height ratio of 0.6 was used to organize eight delta-winglets and seven rectangular ribs on the absorber duct's bottom surface. The attack angles for both winglets and ribs were maintained at 60° and 90°, respectively. The winglet vortex generators were set in a common flow-down configuration with a pitch ratio of 10. This experimental investigation was performed at a mass flow rate of 0.022 kg/s with typical ranges of solar irradiance from 330 W/m2 to 850 W/m2. Results show that the useful energy and thermal efficiency were enhanced by 19.2% and 21.2%, respectively, at maximum solar irradiance compared to a smooth duct. The considered compound ribs and vortex generators affect the temperature of the outlet air, resulting in a considerable improvement in the heat transfer convective rate.
Thermal performance improvement of artificially roughened solar air heater
Solar air heaters are useful because they can lessen the need for fossil fuel–powered electricity, thereby lowering emissions and cutting down on energy costs. Experiments were conducted to inspect the thermal performance of a solar air heater with combined ribs and delta-winglet in a single-pass solar air heater. The present goal was boost the thermal performance of a solar air collector. A constant relative roughness height ratio of 0.6 was used to organize eight delta-winglets and seven rectangular ribs on the absorber duct's bottom surface. The attack angles for both winglets and ribs were maintained at 60° and 90°, respectively. The winglet vortex generators were set in a common flow-down configuration with a pitch ratio of 10. This experimental investigation was performed at a mass flow rate of 0.022 kg/s with typical ranges of solar irradiance from 330 W/m2 to 850 W/m2. Results show that the useful energy and thermal efficiency were enhanced by 19.2% and 21.2%, respectively, at maximum solar irradiance compared to a smooth duct. The considered compound ribs and vortex generators affect the temperature of the outlet air, resulting in a considerable improvement in the heat transfer convective rate.
Thermal performance improvement of artificially roughened solar air heater
Bader, Nabaa M. (Autor:in) / Mushatet, Khudheyer S. (Autor:in)
01.01.2023
Engineering Review : Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva ; ISSN 1330-9587 (Print) ; ISSN 1849-0433 (Online) ; Volume 43 ; Issue 1
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DDC:
690
Frictional resistance in artificially roughened pipes
| Engineering Index Backfile | 1935
Experimental Study of Artificially Roughened Sewer
| British Library Conference Proceedings | 2001
Frictional Resistance in Artificially Roughened Pipes
| ASCE | 2021
| British Library Online Contents | 2016