Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Metrological Evaluation of the Building Influence on Air Temperature Measurements
This paper describes the metrological procedure carried out for the evaluation of the building influence on air temperature measurements. This evaluation aims to produce reliable conclusions, information, and data to contribute to the WMO siting classification schemes for air temperature measurements. For this purpose, a field experiment was designed, deployed, and carried out. As a result, one-year-lasting air temperature measurements were collected and analyzed. In this field experiment, a 200 m wide building is the unique artificial heat source and the unique object projecting shades over a flat surface (no discernible slope) in an open space bigger than 40,000 m2, covered with short grass. Eight calibrated thermometers, equipped with the same model of artificially ventilated radiation shields, were set up at a height of 1.5 m from the ground and at different distances from a 200 m wide building. This configuration provides the observation of the horizontal air temperature radially distributed from the building and, as a conclusion, it enables the quantification of the building influences on air temperature measurements at different distances from the building. This document describes the field experiment, the analysis procedure, the evolution of the building influence on air temperature measurements along the day, and the impact of other meteorological parameters on this building effect. Two different building effects are observed: the positive building effect, where the air temperature decreases with the distance to the building, and the negative building effect, where the air temperature increases with the distance to the building. It is also noticed that the building influence is higher on clear days and the daily maximum building influence values are directly linked with the corresponding maximum solar irradiance. The influence of wind on the building effect is also analyzed, reaching the conclusion that due to characteristic of local winds, in terms of low speed and direction, the wind impact could be ...
Metrological Evaluation of the Building Influence on Air Temperature Measurements
This paper describes the metrological procedure carried out for the evaluation of the building influence on air temperature measurements. This evaluation aims to produce reliable conclusions, information, and data to contribute to the WMO siting classification schemes for air temperature measurements. For this purpose, a field experiment was designed, deployed, and carried out. As a result, one-year-lasting air temperature measurements were collected and analyzed. In this field experiment, a 200 m wide building is the unique artificial heat source and the unique object projecting shades over a flat surface (no discernible slope) in an open space bigger than 40,000 m2, covered with short grass. Eight calibrated thermometers, equipped with the same model of artificially ventilated radiation shields, were set up at a height of 1.5 m from the ground and at different distances from a 200 m wide building. This configuration provides the observation of the horizontal air temperature radially distributed from the building and, as a conclusion, it enables the quantification of the building influences on air temperature measurements at different distances from the building. This document describes the field experiment, the analysis procedure, the evolution of the building influence on air temperature measurements along the day, and the impact of other meteorological parameters on this building effect. Two different building effects are observed: the positive building effect, where the air temperature decreases with the distance to the building, and the negative building effect, where the air temperature increases with the distance to the building. It is also noticed that the building influence is higher on clear days and the daily maximum building influence values are directly linked with the corresponding maximum solar irradiance. The influence of wind on the building effect is also analyzed, reaching the conclusion that due to characteristic of local winds, in terms of low speed and direction, the wind impact could be ...
Metrological Evaluation of the Building Influence on Air Temperature Measurements
Carmen Garcia Izquierdo (Autor:in) / Graziano Coppa (Autor:in) / Sonia Hernandez (Autor:in) / Andrea Merlone (Autor:in) / Garcia Izquierdo, Carmen / Coppa, Graziano / Hernandez, Sonia / Merlone, Andrea
01.01.2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DDC:
690
| ASCE | 2021
Metrological Competence of Length Measurements in a Primary Level Calibration Facility
| British Library Conference Proceedings | 1996
Metrological principles of measuring unsteady temperature fields at friction
| British Library Online Contents | 1993
Metrological Timelines in Traceability
| British Library Conference Proceedings | 1997
Evaluation of Temperature Influence on Friction Measurements
| Online Contents | 2011