Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Thermodynamic Analysis of a 500MWe Coal-fired Supercritical Power Plant with CO2 Capture Integrated with Kalina Cycle for Combined Cooling and Power
Department of Mechanical Engineering, National Institute of Technology Durgapur, Durgapur-713 209, West Bengal, India Mejia Thermal Power Station, Damodar Valley Corporation, Mejia-722 183, Bankura, West Bengal, India E-mail: sujitkarmakar@yahoo.com Manuscript received online 16 June 2020, revised and accepted 11 August 2020 A thermodynamic study is carried out on a 500MWe coal based supercritical thermal power plant (base plant) with MonoEthanolAmine (MEA) based CO2 capture unit integrated with a Kalina Cycle (Low-grade energy cycle) setup for Combined Cooling and Power (CCP) generation using Indian High Ash (HA) coal as fuel, and the results are compared with an imported Low Ash (LA) coal. The modelling and simulation of the different plant configurations are done by using the simulation software “Cycle-Tempo”. The base plant is integrated with the CO2capture unit working on MEA based post combustion carbon capture technique. The separated CO2 is compressed to a pressure and temperature of 110 bar& 35°C, respectively for ease of transportation and storage. During the four-stage CO2 compression the heat wasted through the intercoolers is utilized by using Kalina Cycle System. In Kalina cycle binary mixture of ammonia-water (NH3-H2O) is used as a working fluid. This mixture passes through the intercoolers of the CO2 compression system and got vaporized by utilizing the waste heat. Thereafter, the vapour passes through the two-stage turbines with reheater resulting in additional power generation. The mixture is throttled after the condenser produces the cooling effect. There is about 1.72% of energy efficiency improvement of the proposed integrated plant in comparison with the base plant with CO2 capture. There is about 1.7MW of additional electricity generation along with 5.7 MW of cooling effect (equivalent to 1632 TR) are obtained by this novel technique.
Thermodynamic Analysis of a 500MWe Coal-fired Supercritical Power Plant with CO2 Capture Integrated with Kalina Cycle for Combined Cooling and Power
Department of Mechanical Engineering, National Institute of Technology Durgapur, Durgapur-713 209, West Bengal, India Mejia Thermal Power Station, Damodar Valley Corporation, Mejia-722 183, Bankura, West Bengal, India E-mail: sujitkarmakar@yahoo.com Manuscript received online 16 June 2020, revised and accepted 11 August 2020 A thermodynamic study is carried out on a 500MWe coal based supercritical thermal power plant (base plant) with MonoEthanolAmine (MEA) based CO2 capture unit integrated with a Kalina Cycle (Low-grade energy cycle) setup for Combined Cooling and Power (CCP) generation using Indian High Ash (HA) coal as fuel, and the results are compared with an imported Low Ash (LA) coal. The modelling and simulation of the different plant configurations are done by using the simulation software “Cycle-Tempo”. The base plant is integrated with the CO2capture unit working on MEA based post combustion carbon capture technique. The separated CO2 is compressed to a pressure and temperature of 110 bar& 35°C, respectively for ease of transportation and storage. During the four-stage CO2 compression the heat wasted through the intercoolers is utilized by using Kalina Cycle System. In Kalina cycle binary mixture of ammonia-water (NH3-H2O) is used as a working fluid. This mixture passes through the intercoolers of the CO2 compression system and got vaporized by utilizing the waste heat. Thereafter, the vapour passes through the two-stage turbines with reheater resulting in additional power generation. The mixture is throttled after the condenser produces the cooling effect. There is about 1.72% of energy efficiency improvement of the proposed integrated plant in comparison with the base plant with CO2 capture. There is about 1.7MW of additional electricity generation along with 5.7 MW of cooling effect (equivalent to 1632 TR) are obtained by this novel technique.
Thermodynamic Analysis of a 500MWe Coal-fired Supercritical Power Plant with CO2 Capture Integrated with Kalina Cycle for Combined Cooling and Power
Nitesh Kumar Choudhary (Autor:in) / GoutamKhankari (Autor:in) / SujitKarmakar (Autor:in)
01.10.2020
oai:zenodo.org:5969905
Journal Of India Chemical Society Vol. 97, No. 10b(Oct 2020) 1983-1989
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
DDC:
690