Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Flow behavior of asphalt mixtures under compaction
Asphalt compaction is one of the most important phases of road construction, being the decisive phase when the structure of the asphalt pavement layer is formed. In spite of its importance, the knowledge about this construction phase is still based on empirical and technological background and therefore surprisingly limited. This lack of knowledge is also due to the fact that the existing laboratory scale compaction devices for mix design are not fully capable of simulating the field compaction. The simulation of asphalt compaction in the laboratory is normally focused on the vertical rearrangements of asphalt particles whereas the flow behavior of these particles in other directions is mostly neglected. However, existing literature suggests that the neglected flow is one of the most important factors for the quality of the road construction, particularly in special cases such as asphalt joints. Therefore, building up a better understanding of the flow behavior of asphalt mixtures subjected to compaction loads is needed for improving the quality of the pavements. In this study, a new test setup, the so called Compaction Flow Test (CFT), was developed to simulate the flow behavior of asphalt mixtures at early stages of compaction. In the first step, feasibility tests were performed, substituting asphalt mixtures by model materials with simple geometries and less complex properties. X-ray Computed Tomography (CT) was utilized for capturing 2D radiography images of the flow patterns in the model material during the test. Results of the CFT showed the capability of the new test setup to clearly distinguish between model mixtures with different characteristics. Hence, in the next step, the CFT was applied to real asphalt mixtures and the obtained results were found to support the findings of the feasibility tests with the model materials. The results from the feasibility tests encouraged examining the possible use of an ultrasonic sensor as alternative to the complex and costly X-ray imaging for flow measurements ...
Flow behavior of asphalt mixtures under compaction
Asphalt compaction is one of the most important phases of road construction, being the decisive phase when the structure of the asphalt pavement layer is formed. In spite of its importance, the knowledge about this construction phase is still based on empirical and technological background and therefore surprisingly limited. This lack of knowledge is also due to the fact that the existing laboratory scale compaction devices for mix design are not fully capable of simulating the field compaction. The simulation of asphalt compaction in the laboratory is normally focused on the vertical rearrangements of asphalt particles whereas the flow behavior of these particles in other directions is mostly neglected. However, existing literature suggests that the neglected flow is one of the most important factors for the quality of the road construction, particularly in special cases such as asphalt joints. Therefore, building up a better understanding of the flow behavior of asphalt mixtures subjected to compaction loads is needed for improving the quality of the pavements. In this study, a new test setup, the so called Compaction Flow Test (CFT), was developed to simulate the flow behavior of asphalt mixtures at early stages of compaction. In the first step, feasibility tests were performed, substituting asphalt mixtures by model materials with simple geometries and less complex properties. X-ray Computed Tomography (CT) was utilized for capturing 2D radiography images of the flow patterns in the model material during the test. Results of the CFT showed the capability of the new test setup to clearly distinguish between model mixtures with different characteristics. Hence, in the next step, the CFT was applied to real asphalt mixtures and the obtained results were found to support the findings of the feasibility tests with the model materials. The results from the feasibility tests encouraged examining the possible use of an ultrasonic sensor as alternative to the complex and costly X-ray imaging for flow measurements ...
Flow behavior of asphalt mixtures under compaction
Ghafoori Roozbahany, Ehsan (Autor:in)
01.01.2017
2017:07
Hochschulschrift
Elektronische Ressource
Englisch
Method for Predicting the Laboratory Compaction Behavior of Asphalt Mixtures
| Online Contents | 2015
Method for Predicting the Laboratory Compaction Behavior of Asphalt Mixtures
| British Library Online Contents | 2015
Determining Compaction Temperatures Based on Asphalt Mixtures Test
| British Library Conference Proceedings | 2010