Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Design approaches for grouting of rock fractures; Theory and practice
Currently, cement base grout is used widely for sealing of the rock fractures in order to decrease the permeability of rock mass. Grouting procedure is one of the main tasks in cycle of rock excavation. In addition, huge amount of grout should be used during dam construction in order to seal the bedding and embankment walls. Therefore, considering the effect of grouting in duration and cost of the project, improving the design methods seems essential. In successful grouting the goal is to achieve the required sealing of fractures while avoiding ground movement due to applied pressure. Empirical methods have been developed to decide the pumping pressure, grout mix properties and stop criteria in order to fulfill requirements of successful grouting but there are ambiguities in using them and performance of them have been questioned. In these methods, assumptions and criteria are based on rules of thumbs and experiences from previous projects. The main uncertainties connected to these methods are identifying amount of grout spread and state of the fracture. Theoretical approach is an analytical solution which provides the chance for estimation of penetration length of the grout in real time. Furthermore, void filling fracture aperture and trend of the grout flow are estimated. As the development of this theory, elastic and ultimate jacking limits have been established based on the estimated penetration length. Therefore, it is possible to identify jacking of the fracture and estimate the state of the fracture in real time. In this research work, performance of this theoretical approach which is called “Real Time Grouting Control Method” has been validated through case studies. Properties of the used material, data for pressure and flow in addition to geological characteristics have been gathered from projects in sedimentary rock (Gotvand Dam in Iran and THX Dam in Laos) and hard rock (City Line Project in Sweden). This theory made it possible to observe overflow of grout and jacking of the fractures in sedimentary ...
Design approaches for grouting of rock fractures; Theory and practice
Currently, cement base grout is used widely for sealing of the rock fractures in order to decrease the permeability of rock mass. Grouting procedure is one of the main tasks in cycle of rock excavation. In addition, huge amount of grout should be used during dam construction in order to seal the bedding and embankment walls. Therefore, considering the effect of grouting in duration and cost of the project, improving the design methods seems essential. In successful grouting the goal is to achieve the required sealing of fractures while avoiding ground movement due to applied pressure. Empirical methods have been developed to decide the pumping pressure, grout mix properties and stop criteria in order to fulfill requirements of successful grouting but there are ambiguities in using them and performance of them have been questioned. In these methods, assumptions and criteria are based on rules of thumbs and experiences from previous projects. The main uncertainties connected to these methods are identifying amount of grout spread and state of the fracture. Theoretical approach is an analytical solution which provides the chance for estimation of penetration length of the grout in real time. Furthermore, void filling fracture aperture and trend of the grout flow are estimated. As the development of this theory, elastic and ultimate jacking limits have been established based on the estimated penetration length. Therefore, it is possible to identify jacking of the fracture and estimate the state of the fracture in real time. In this research work, performance of this theoretical approach which is called “Real Time Grouting Control Method” has been validated through case studies. Properties of the used material, data for pressure and flow in addition to geological characteristics have been gathered from projects in sedimentary rock (Gotvand Dam in Iran and THX Dam in Laos) and hard rock (City Line Project in Sweden). This theory made it possible to observe overflow of grout and jacking of the fractures in sedimentary ...
Design approaches for grouting of rock fractures; Theory and practice
Yaghoobi Rafi, Jalaleddin (Autor:in)
01.01.2013
2021
Hochschulschrift
Elektronische Ressource
Englisch
Grouting Rock Fractures with Cement Grout
| Online Contents | 2012
Grouting Rock Fractures with Cement Grout
| British Library Online Contents | 2012
Grouting Rock Fractures with Cement Grout
| Online Contents | 2012
Running Limit and Refusal in Rock Fractures Grouting
| Online Contents | 2019
Running Limit and Refusal in Rock Fractures Grouting
| Online Contents | 2019