Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Experimental Tests of Pre - placed Aggregate Concrete for Concrete Repairs
Since a large part of the hydropower structures in Sweden was built in the 1950s and 1960s, many of them are slowly but surely exhibiting deterioration. The hydropower companies are facing big challenges and are consequently investing in effective repairing methods since a hydropower structure failure could pose serious consequences and dangers to people, the environment, and the community. Many structures within hydropower are made of concrete and the demands on the new supplementing concrete are high. Concrete with the potential to meet these high demands is the pre-placed aggregate concrete, which has shown promising results regarding its mechanical properties in previous studies. For this reason, this type of concrete is of interest to investigate. The focus has not been on optimizing the pre-placed aggregate concrete for full-scale productions. Instead, the main objectives of this master thesis were to study and analyze the mechanical properties of this type of concrete, such as shrinkage, compressive strength, splitting tensile strength, freeze-thaw resistance and moreover investigate parameters of importance in the mix design to obtain a homogenous and easy flowing grout that successfully could fill the voids between the coarse aggregates. The investigations were carried out by laboratory experiments in the research and laboratory facilities of Vattenfall in Älvkarleby. The mix design of the grout was developed using the methods and requirements stated in the American Society for Testing and Materials, ASTM standards, and The Swedish Institute for Standards, SiS. A total of 15 grout-mixes were made. However, only the last five were used to cast specimens as the air content was insufficient in the first ten. The results indicated that it is necessary to replace the air-entraining admixture with microspheres in order for the pre-placed aggregate concrete to meet the requirements in exposure class XF3 and XC4. The scaling of the pre-placed aggregate concrete was less than 0.1 kg/m2 at 56 cycles, and thus, ...
Experimental Tests of Pre - placed Aggregate Concrete for Concrete Repairs
Since a large part of the hydropower structures in Sweden was built in the 1950s and 1960s, many of them are slowly but surely exhibiting deterioration. The hydropower companies are facing big challenges and are consequently investing in effective repairing methods since a hydropower structure failure could pose serious consequences and dangers to people, the environment, and the community. Many structures within hydropower are made of concrete and the demands on the new supplementing concrete are high. Concrete with the potential to meet these high demands is the pre-placed aggregate concrete, which has shown promising results regarding its mechanical properties in previous studies. For this reason, this type of concrete is of interest to investigate. The focus has not been on optimizing the pre-placed aggregate concrete for full-scale productions. Instead, the main objectives of this master thesis were to study and analyze the mechanical properties of this type of concrete, such as shrinkage, compressive strength, splitting tensile strength, freeze-thaw resistance and moreover investigate parameters of importance in the mix design to obtain a homogenous and easy flowing grout that successfully could fill the voids between the coarse aggregates. The investigations were carried out by laboratory experiments in the research and laboratory facilities of Vattenfall in Älvkarleby. The mix design of the grout was developed using the methods and requirements stated in the American Society for Testing and Materials, ASTM standards, and The Swedish Institute for Standards, SiS. A total of 15 grout-mixes were made. However, only the last five were used to cast specimens as the air content was insufficient in the first ten. The results indicated that it is necessary to replace the air-entraining admixture with microspheres in order for the pre-placed aggregate concrete to meet the requirements in exposure class XF3 and XC4. The scaling of the pre-placed aggregate concrete was less than 0.1 kg/m2 at 56 cycles, and thus, ...
Experimental Tests of Pre - placed Aggregate Concrete for Concrete Repairs
Hassan, Husseen (Autor:in) / Sahal, Abdifatah (Autor:in)
01.01.2020
Hochschulschrift
Elektronische Ressource
Englisch
DDC:
690
Grout composition for pre-placed aggregate concrete and pre-placed aggregate concrete using the same
| Europäisches Patentamt | 2019
Emerald Group Publishing | 2001
Online Contents | 1996
Pre-placed aggregate for spillway grouted to form "prepakt" concrete
Engineering Index Backfile | 1951
Online Contents | 1996