Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
High-Rate Contact Stabilization Process-Coupled Membrane Bioreactor for Maximal Recovery of Organics from Municipal Wastewater
The high-rate activated sludge (HRAS) process is being studied for the removal and recovery of organics with short solids retention time (SRT) from wastewater, facilitating energy recovery by the subsequent anaerobic digestion process. In the present study, the feasibility of a novel high-rate contact stabilization (HRCS) process coupled with a membrane bioreactor (MBR) was investigated as a HRAS technique to harvest organics compared to a high-loaded MBR (HL-MBR) process treating the same sewage. Results showed that higher chemical oxygen demand (COD) removal efficiency and better bioflocculation performance were obtained using HRCS-MBR compared with HL-MBR with SRTs from 0.5 to 1.8 days. The increased bound extracellular polymeric substances content in the contactor was responsible for the improved biosorption and bioflocculation performance in the HRCS-MBR configuration. At an optimal SRT of 1.2 days, incoming organics of 47.5% and 40.5% were harvested in concentrate for HRCS-MBR and HL-MBR. These harvested organics from the concentrate per liter from HRCS-MBR and HL-MBR produced 4.28 × 10−3 and 3.72 × 10−3 kWh of electricity, respectively. The clear advantage of fouling control for HRCS-MBR was determined because of significantly lower concentrations of colloidal materials and soluble microbial products in the concentrate compared with HL-MBR. Therefore, HRCS-MBR holds promise for organics recovery and sustainable wastewater treatment.
High-Rate Contact Stabilization Process-Coupled Membrane Bioreactor for Maximal Recovery of Organics from Municipal Wastewater
The high-rate activated sludge (HRAS) process is being studied for the removal and recovery of organics with short solids retention time (SRT) from wastewater, facilitating energy recovery by the subsequent anaerobic digestion process. In the present study, the feasibility of a novel high-rate contact stabilization (HRCS) process coupled with a membrane bioreactor (MBR) was investigated as a HRAS technique to harvest organics compared to a high-loaded MBR (HL-MBR) process treating the same sewage. Results showed that higher chemical oxygen demand (COD) removal efficiency and better bioflocculation performance were obtained using HRCS-MBR compared with HL-MBR with SRTs from 0.5 to 1.8 days. The increased bound extracellular polymeric substances content in the contactor was responsible for the improved biosorption and bioflocculation performance in the HRCS-MBR configuration. At an optimal SRT of 1.2 days, incoming organics of 47.5% and 40.5% were harvested in concentrate for HRCS-MBR and HL-MBR. These harvested organics from the concentrate per liter from HRCS-MBR and HL-MBR produced 4.28 × 10−3 and 3.72 × 10−3 kWh of electricity, respectively. The clear advantage of fouling control for HRCS-MBR was determined because of significantly lower concentrations of colloidal materials and soluble microbial products in the concentrate compared with HL-MBR. Therefore, HRCS-MBR holds promise for organics recovery and sustainable wastewater treatment.
High-Rate Contact Stabilization Process-Coupled Membrane Bioreactor for Maximal Recovery of Organics from Municipal Wastewater
Wenchen Dai (Autor:in) / Xiaochen Xu (Autor:in) / Fenglin Yang (Autor:in)
2018
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Membrane Bioreactor Model for Removal of Organics from Wastewater
Taylor & Francis Verlag | 1995
|Development of Membrane Bioreactor for Removal of Trace Organics from Wastewater
British Library Conference Proceedings | 1994
|Recirculating Anaerobic Dynamic Membrane Bioreactor Treatment of Municipal Wastewater
American Chemical Society | 2022
|