Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
The Use of Sodium Percarbonate in the Fenton Reaction for the PAHs Oxidation
The aim of the paper was to determine the effectiveness of the removal of 4, 5and 6 - ring PAHs from coking wastewater using sodium percarbonate Na2CO3∙1,5 H2O2 and iron sulphate in acid condition. The samples were exposing to ultraviolet rays. The source of UV-C radiation was a lamp emitting a wave of light with a length of λ = 264 nm, placed directly above the layer of the samples wastewater. The sodium percarbonate Na2CO3 1.5 H2O2 doses were determined on the basis of stoichiometric calculation. Ratio of iron ions to the hydrogen peroxide released in reaction was: 0.5; 0.4; 0.3; 0.2; 0.1. Before and after the oxidation process, COD and TOC value were determined and as well as concentrations of selected PAHs. The total concentration of tested PAHs before oxidation reached the value of 995 μg/L. The average content of organic pollutants determined by the chemical oxygen demand (COD) was 538 mg/L, while the average content of Total organic carbon (TOC) was 180 mg/L. The use of sodium percarbonate caused the oxidation of organic pollutants and lowering of COD and TOC in the following ranges: 22-46% and 10-30%. For individual PAHs the degradation efficiency was in the ranged from 95% to 99.9%. The degradation efficiency of 4 ring hydrocarbons caused 98% and 5 and 6 ring of hydrocarbons was 98.7% and 99.4%, respectively.
The Use of Sodium Percarbonate in the Fenton Reaction for the PAHs Oxidation
The aim of the paper was to determine the effectiveness of the removal of 4, 5and 6 - ring PAHs from coking wastewater using sodium percarbonate Na2CO3∙1,5 H2O2 and iron sulphate in acid condition. The samples were exposing to ultraviolet rays. The source of UV-C radiation was a lamp emitting a wave of light with a length of λ = 264 nm, placed directly above the layer of the samples wastewater. The sodium percarbonate Na2CO3 1.5 H2O2 doses were determined on the basis of stoichiometric calculation. Ratio of iron ions to the hydrogen peroxide released in reaction was: 0.5; 0.4; 0.3; 0.2; 0.1. Before and after the oxidation process, COD and TOC value were determined and as well as concentrations of selected PAHs. The total concentration of tested PAHs before oxidation reached the value of 995 μg/L. The average content of organic pollutants determined by the chemical oxygen demand (COD) was 538 mg/L, while the average content of Total organic carbon (TOC) was 180 mg/L. The use of sodium percarbonate caused the oxidation of organic pollutants and lowering of COD and TOC in the following ranges: 22-46% and 10-30%. For individual PAHs the degradation efficiency was in the ranged from 95% to 99.9%. The degradation efficiency of 4 ring hydrocarbons caused 98% and 5 and 6 ring of hydrocarbons was 98.7% and 99.4%, respectively.
The Use of Sodium Percarbonate in the Fenton Reaction for the PAHs Oxidation
Kozak Jolanta (Autor:in) / Włodarczyk-Makuła Maria (Autor:in)
2018
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
| DOAJ | 2024
Ascorbic Acid-Enhanced CuO/Percarbonate Oxidation: Insights Into the pH-Dependent Mechanism
| American Chemical Society | 2023
Is sodium percarbonate a good choice in situ remediation of deltamethrin pollution?
| Springer Verlag | 2017