Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Physical and mechanical behaviour of recycled concrete under destructive and non-destructive testing
Aggregates recycled from construction sites may exhibit slightly inferior characteristics compared to natural aggregates in terms of porosity, friability, and variability. However, it must be acknowledged that although recycled aggregates are currently used only in small proportions for manufacturing concrete, their usage is steadily increasing. It is now widely recognised that the reuse of recycled aggregates in mortar and concrete significantly contributes to the preservation of alluvial aggregates. The valorisation of recycled aggregates in concrete and mortar offers a clear economic advantage in the construction sector. Indeed, the reuse of materials from demolition could be envisaged directly on site or at construction waste recycling and treatment platforms. Additionally, it should be noted that to date, there is no specific standard for measuring the water absorption of recycled aggregates. Regarding the physical properties, the estimation of the absorption kinetics of the recycled aggregates has proved necessary. Moreover, other equally important measurements must be undertaken to determine all the other properties. The results obtained demonstrated that a good correlation exists between the substitution rate and the physical and mechanical properties of the prepared concrete. Furthermore, it was decided to vary the substitution rate of natural sand with recycled sand during the manufacture of concrete according to the following percentages: 25% recycled sand with 75% natural sand, and 50% recycled sand with 50% natural sand.
Physical and mechanical behaviour of recycled concrete under destructive and non-destructive testing
Aggregates recycled from construction sites may exhibit slightly inferior characteristics compared to natural aggregates in terms of porosity, friability, and variability. However, it must be acknowledged that although recycled aggregates are currently used only in small proportions for manufacturing concrete, their usage is steadily increasing. It is now widely recognised that the reuse of recycled aggregates in mortar and concrete significantly contributes to the preservation of alluvial aggregates. The valorisation of recycled aggregates in concrete and mortar offers a clear economic advantage in the construction sector. Indeed, the reuse of materials from demolition could be envisaged directly on site or at construction waste recycling and treatment platforms. Additionally, it should be noted that to date, there is no specific standard for measuring the water absorption of recycled aggregates. Regarding the physical properties, the estimation of the absorption kinetics of the recycled aggregates has proved necessary. Moreover, other equally important measurements must be undertaken to determine all the other properties. The results obtained demonstrated that a good correlation exists between the substitution rate and the physical and mechanical properties of the prepared concrete. Furthermore, it was decided to vary the substitution rate of natural sand with recycled sand during the manufacture of concrete according to the following percentages: 25% recycled sand with 75% natural sand, and 50% recycled sand with 50% natural sand.
Physical and mechanical behaviour of recycled concrete under destructive and non-destructive testing
Lynda Amel Chaabane (Autor:in) / Hamza Soualhi (Autor:in) / Ilies Fellah (Autor:in) / Yassine Khalfi (Autor:in) / Nadia Sirine Bouayed (Autor:in)
2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Non-Destructive Testing of Concrete with Fine Recycled Aggregate
Trans Tech Publications | 2016
|Non Destructive Testing of Concrete with Recycled Cement Powder
Trans Tech Publications | 2016
|The early age non-destructive testing of concrete made with recycled concrete aggregate
Online Contents | 2012
|The early age non-destructive testing of concrete made with recycled concrete aggregate
British Library Online Contents | 2012
|