Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Fine Particle Separation by Revised Type Air-Cyclone Classifier [Translated]†
Experimental and theoretical studies were conducted on the separation of submicron powder using a revised type of cyclone. The cyclone has a movable inlet guide plate at the inlet section, and 50% cut size is controlled from 0.45 to 0.75 μm by changing the inlet clearance of the guide plate. But the 50% cut size increases again with a very narrow inlet clearance of the guide plate, because the radial velocity of particles decreases and fluid turbulence increases under such condition. The 50% cut size decreases to about 0.4 μm when both the inlet guide plate and the blowdown method are used. The partial separation efficiency with a spiral-inlet cyclone is higher than a cyclone with tangential inlet, and the 50% cut size decreases with a highly polished inside wall surface. † This report was originally printed in KAGAKU KOGAKU RONBUNSHU, 19(3), 476-482 (1993) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Chemical Engineers, Japan.
Fine Particle Separation by Revised Type Air-Cyclone Classifier [Translated]†
Experimental and theoretical studies were conducted on the separation of submicron powder using a revised type of cyclone. The cyclone has a movable inlet guide plate at the inlet section, and 50% cut size is controlled from 0.45 to 0.75 μm by changing the inlet clearance of the guide plate. But the 50% cut size increases again with a very narrow inlet clearance of the guide plate, because the radial velocity of particles decreases and fluid turbulence increases under such condition. The 50% cut size decreases to about 0.4 μm when both the inlet guide plate and the blowdown method are used. The partial separation efficiency with a spiral-inlet cyclone is higher than a cyclone with tangential inlet, and the 50% cut size decreases with a highly polished inside wall surface. † This report was originally printed in KAGAKU KOGAKU RONBUNSHU, 19(3), 476-482 (1993) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Chemical Engineers, Japan.
Fine Particle Separation by Revised Type Air-Cyclone Classifier [Translated]†
Hideto Yoshida (Autor:in) / Tatsuya Saeki (Autor:in) / Toshiyuki Fujioka (Autor:in) / Tetsuya Ueda (Autor:in) / Tadashi Fuyuki (Autor:in)
2014
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
CLASSIFIER CYCLONE FOR DESULFURIZATION SYSTEM AND MANUFACTURING METHOD
Europäisches Patentamt | 2021
|Archimedes spiral runner type cyclone separation well
Europäisches Patentamt | 2021
|British Library Online Contents | 2006
|