Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Study on directional hydraulic fracturing of prefabricated fissures in top coal
In order to improve the cavity and working surface operating environment of thick hard top coal, the top coal prefabricated fissure hydraulic fracturing technology was proposed.The basic principle of directional fracturing was studied and the stress models of borehole and fissures were analyzed then the cracking conditions, the propagation process and its morphology of fissures were obtained.The RFPA2D-Flow percolation software was used to study the directional fracturing of top coal:In the initial stage of fracturing, the high stress concentration occurs at the tip of the fissures, a relief zone forms in the borehole and the both side of directional fissure and it gradually increases with water injection pressure.Meanwhile, the high water pressure zone forms around drilling and directional cracks and it gradually increases with water injection pressure.In the early stage of fissures, the shear failure occurred in the coal body, and a large number of tensile damage occurred in the later stage of fracturing.When the orientation crack angle α is between 0°~60°, cracks appear and extend, then change direction.When the inclination angle α is 75ånd 90°, the fissures extends along the maximum horizontal principal stress direction.
Study on directional hydraulic fracturing of prefabricated fissures in top coal
In order to improve the cavity and working surface operating environment of thick hard top coal, the top coal prefabricated fissure hydraulic fracturing technology was proposed.The basic principle of directional fracturing was studied and the stress models of borehole and fissures were analyzed then the cracking conditions, the propagation process and its morphology of fissures were obtained.The RFPA2D-Flow percolation software was used to study the directional fracturing of top coal:In the initial stage of fracturing, the high stress concentration occurs at the tip of the fissures, a relief zone forms in the borehole and the both side of directional fissure and it gradually increases with water injection pressure.Meanwhile, the high water pressure zone forms around drilling and directional cracks and it gradually increases with water injection pressure.In the early stage of fissures, the shear failure occurred in the coal body, and a large number of tensile damage occurred in the later stage of fracturing.When the orientation crack angle α is between 0°~60°, cracks appear and extend, then change direction.When the inclination angle α is 75ånd 90°, the fissures extends along the maximum horizontal principal stress direction.
Study on directional hydraulic fracturing of prefabricated fissures in top coal
Lü Huayong (Autor:in) / Liu Fei (Autor:in) / Li Lianghui (Autor:in) / Cheng Zhanbo (Autor:in)
2018
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Method for Directional Hydraulic Fracturing
| NTIS | 1993
Hydraulic fracturing in coal industry
| Engineering Index Backfile | 1961
Predicting and Controlling Hydraulic Fracturing During Horizontal Directional Drilling
| British Library Conference Proceedings | 2003
Hydraulic fracturing for underground gasification of coal deposits
| Engineering Index Backfile | 1964
| Trans Tech Publications | 2014