Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wear resistance was measured by dry sand rubber wheel abrasive tests. Microscopy analyses demonstrated that the precipitation of titanium carbonitrides resulted in a coarse microstructure, with large columnar grains coexisting with equiaxed ones. Consequently, these samples presented lower mechanical properties in comparison with the samples without titanium and nitrogen, which showed a finer microstructure. On the other hand, the presence of hard Ti(C, N) precipitates in the microstructure improved the abrasive wear performance of the steel during the abrasive tests.
Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wear resistance was measured by dry sand rubber wheel abrasive tests. Microscopy analyses demonstrated that the precipitation of titanium carbonitrides resulted in a coarse microstructure, with large columnar grains coexisting with equiaxed ones. Consequently, these samples presented lower mechanical properties in comparison with the samples without titanium and nitrogen, which showed a finer microstructure. On the other hand, the presence of hard Ti(C, N) precipitates in the microstructure improved the abrasive wear performance of the steel during the abrasive tests.
Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Pablo Enrique Guzman Fernandes (Autor:in) / Leandro Arruda Santos (Autor:in)
2019
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
On the comparison of the abrasive wear behavior of aluminum alloyed and standard Hadfield steels
| British Library Online Contents | 2010
Microstructure based modeling of the strain rate history effect in wear resistant Hadfield steels
| British Library Online Contents | 2018
Impact-Abrasive Wear Resistance in Steels
| British Library Online Contents | 1993
Effect of alloying additives on impact-abrasive wear of manual arc welded hadfield steel hardfacings
| British Library Online Contents | 2016
Effect of fracture toughness on abrasive wear resistance of steels
| Elsevier | 2005