Study of Sawing Parameters for <i>Caragana korshinskii</i> (C.K.) Branches: Fid-Bau Portal

Study of Sawing Parameters for Caragana korshinskii (C.K.) Branches

Yaoyao Gao / Yutong Wang / Aili Qu / Jiangming Kan / Feng Kang / Yutan Wang

To solve the problems of poor sawing surface quality, severe blade wear and high power consumption caused by unreasonable working parameters in the process of Caragana korshinskii (C.K.) stumping, this study explored the effects of branch diameter (D), sawing speed $(v_{c})$ , feeding speed $(v_{f})$ , cutting inclination (α), number of circular saw teeth (T) and moisture content (M) on sawing power consumption (P) and sawing surface quality (A) through a single-factor test using a homemade branch sawing bench. Based on the Box–Behnken design principle, a multi-factor test was carried out based on a single-factor test with $v_{c}$ , $v_{f}$ , α and T as influencing factors and with P and A as targets, establishing a regression model. The test results show that the sawing power consumption (P) increases with increasing D, decreases with increasing M, and decreases first and then increases with increasing $v_{c}$ , $v_{f}$ , α and T; the sawing surface quality (A) increases first and then decreases with increasing D, increases with increasing M, and first increases and then decreases with increasing $v_{c}$ , $v_{f}$ , α and T. The optimum combination of parameters for the regression model was obtained with $v_{c}$ of 45.24 m/s, $v_{f}$ of 0.34 m/s, α of 10° and T of 100, which resulted in the P of 177.46 J and A of 85.87%. The errors between the predicted and actual values of P and A are 3.1% and 6%, respectively. The study can provide information to support the development of subsequent C.K. stubble equipment.