Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Adsorption of Methylene Blue by Coal-Based Activated Carbon in High-Salt Wastewater
High-salt printing and dyeing wastewater is a difficult industrial wastewater to treat. Coal-based activated carbon (CBAC) can be used as an adsorbent to treat high-salt printing and dyeing wastewater and realize the resource utilization of CBAC. In this study, simulated wastewater that contained methylene blue (MB) was used as the research object, and CBAC was used as the adsorbent. The effects of CBAC dosage, NaCl concentration, coexisting ions, adsorption time, MB concentration, humic acid concentration, and solution pH on the adsorption performance of CBAC with MB were discussed. The results showed that when the CBAC dosage was 0.6 g/L, the solution pH was greater than 6, the adsorption time was 8 h, the adsorption temperature was 308 K, and the MB concentration was 10 mg/L. Thus, the maximum adsorption capacity of CBAC with MB was obtained. The maximum adsorption capacity and removal rate were 15.5 mg/L and 90%, respectively. High-salt wastewater can inhibit the adsorption of methylene blue by coal-based activated carbon. In addition, 20 g/L of NaCl reduced the adsorption capacity of coal-based activated carbon by 1.8 mg/g. Compared to the other coexisting ions, the influence of the presence of Cu2+ and Fe3+ on the removal of methylene blue was greater. However, when Cu2+, Fe3+ and high-salt wastewater coexist, the inhibition effect decreases.
Adsorption of Methylene Blue by Coal-Based Activated Carbon in High-Salt Wastewater
High-salt printing and dyeing wastewater is a difficult industrial wastewater to treat. Coal-based activated carbon (CBAC) can be used as an adsorbent to treat high-salt printing and dyeing wastewater and realize the resource utilization of CBAC. In this study, simulated wastewater that contained methylene blue (MB) was used as the research object, and CBAC was used as the adsorbent. The effects of CBAC dosage, NaCl concentration, coexisting ions, adsorption time, MB concentration, humic acid concentration, and solution pH on the adsorption performance of CBAC with MB were discussed. The results showed that when the CBAC dosage was 0.6 g/L, the solution pH was greater than 6, the adsorption time was 8 h, the adsorption temperature was 308 K, and the MB concentration was 10 mg/L. Thus, the maximum adsorption capacity of CBAC with MB was obtained. The maximum adsorption capacity and removal rate were 15.5 mg/L and 90%, respectively. High-salt wastewater can inhibit the adsorption of methylene blue by coal-based activated carbon. In addition, 20 g/L of NaCl reduced the adsorption capacity of coal-based activated carbon by 1.8 mg/g. Compared to the other coexisting ions, the influence of the presence of Cu2+ and Fe3+ on the removal of methylene blue was greater. However, when Cu2+, Fe3+ and high-salt wastewater coexist, the inhibition effect decreases.
Adsorption of Methylene Blue by Coal-Based Activated Carbon in High-Salt Wastewater
Jinlong Wang (Autor:in) / Jingqian Ma (Autor:in) / Yongjun Sun (Autor:in)
2022
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Methylene Blue Dye Adsorption to Durian Shell Activated Carbon
| British Library Online Contents | 2014
Adsorption kinetics of waste fabrics based activated carbon to methylene blue
| British Library Online Contents | 2016
Study of adsorption of methylene blue onto activated carbon from lignite
| British Library Online Contents | 2015
Preparation of Coal-Based Activated Carbon and its Application for Methylene Blue Removal
| British Library Conference Proceedings | 2013
Adsorption of Methylene Blue in Water onto Activated Carbon by Surfactant Modification
| DOAJ | 2020