Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)
A novel biochar alginate composite adsorbent was synthesized and applied for removal of Zn2+ ions from aqueous solution. Kinetics, equilibrium and thermodynamic studies showed the suitability of the adsorbent. From a Langmuir isotherm study, the maximum monolayer adsorption capacity of the composite adsorbent was found to be 120 mg/g. To investigate the effect of process variables like initial Zn2+ concentration (25⁻100 mg/L), adsorbent dose (0.4⁻8 g/L) and temperature (298⁻318 K) on Zn2+ adsorption, response surface methodology (RSM) based on a three independent variables central composite design of experiments was employed. A quadratic model equation was developed to predict the relationship between the independent variables and response for maximum Zn2+ removal. The optimization study reveals that the initial Zn2+ concentration and adsorbent dose were the most effective parameters for removal of Zn2+ due to higher magnitude of F-statistic value which effects to a large extent of Zn2+ removal. The optimum physicochemical condition for maximum removal of Zn2+ was determined from the RSM study. The optimum conditions are 43.18 mg/L initial metal ion concentration, 0.062 g adsorbent dose and a system temperature of 313.5 K. At this particular condition, the removal efficiency of Zn2+ was obtained as 85%.
Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)
A novel biochar alginate composite adsorbent was synthesized and applied for removal of Zn2+ ions from aqueous solution. Kinetics, equilibrium and thermodynamic studies showed the suitability of the adsorbent. From a Langmuir isotherm study, the maximum monolayer adsorption capacity of the composite adsorbent was found to be 120 mg/g. To investigate the effect of process variables like initial Zn2+ concentration (25⁻100 mg/L), adsorbent dose (0.4⁻8 g/L) and temperature (298⁻318 K) on Zn2+ adsorption, response surface methodology (RSM) based on a three independent variables central composite design of experiments was employed. A quadratic model equation was developed to predict the relationship between the independent variables and response for maximum Zn2+ removal. The optimization study reveals that the initial Zn2+ concentration and adsorbent dose were the most effective parameters for removal of Zn2+ due to higher magnitude of F-statistic value which effects to a large extent of Zn2+ removal. The optimum physicochemical condition for maximum removal of Zn2+ was determined from the RSM study. The optimum conditions are 43.18 mg/L initial metal ion concentration, 0.062 g adsorbent dose and a system temperature of 313.5 K. At this particular condition, the removal efficiency of Zn2+ was obtained as 85%.
Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)
Subrata Biswas (Autor:in) / Manisha Bal (Autor:in) / Sushanta Kumar Behera (Autor:in) / Tushar Kanti Sen (Autor:in) / Bhim Charan Meikap (Autor:in)
2019
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
| Europäisches Patentamt | 2021