Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Initial growth phase of W-fuzz formation in ultra-long pulse helium discharge in LHD
In order to confirm the formation of a tungsten fiberform nanostructure (W-fuzz) by helium plasma exposure in the large-sized plasma confinement device, the bulk tungsten with the size of 80 × 20 × 1.5 mm3 was inserted into the divertor leg position in the Large Helical Device (LHD). Then, it was exposed to the divertor plasma during the ultra-long pulse helium discharges with 10,190s in total. The width of the divertor plasma, incident ion energy and total fluence were expected to be ∼2cm, 100–200eV and ∼5 ×1025 He/m2 (strike position), respectively. The surface temperature of the tungsten specimen was monitored by IR camera. The typical surface temperature of the divertor strike point was estimated to be around 1900∼2300K. After the exposure, an initial growth phase of tungsten fiberform nanostructure (W-fuzz) was able to be identified on the tungsten surface. The finest initial growth phase of the W-fuzz structure was able to be identified on the central region of the divertor strike point, where retention amount of helium was estimated to be ∼8 ×1021 He/m2. This study is the first simultaneous evaluation of the W-fuzz growth and quantification of the helium retention in the large-sized plasma confinement device. Keywords: W-fuzz, TEM observation, Ion beam analysis, LHD
Initial growth phase of W-fuzz formation in ultra-long pulse helium discharge in LHD
In order to confirm the formation of a tungsten fiberform nanostructure (W-fuzz) by helium plasma exposure in the large-sized plasma confinement device, the bulk tungsten with the size of 80 × 20 × 1.5 mm3 was inserted into the divertor leg position in the Large Helical Device (LHD). Then, it was exposed to the divertor plasma during the ultra-long pulse helium discharges with 10,190s in total. The width of the divertor plasma, incident ion energy and total fluence were expected to be ∼2cm, 100–200eV and ∼5 ×1025 He/m2 (strike position), respectively. The surface temperature of the tungsten specimen was monitored by IR camera. The typical surface temperature of the divertor strike point was estimated to be around 1900∼2300K. After the exposure, an initial growth phase of tungsten fiberform nanostructure (W-fuzz) was able to be identified on the tungsten surface. The finest initial growth phase of the W-fuzz structure was able to be identified on the central region of the divertor strike point, where retention amount of helium was estimated to be ∼8 ×1021 He/m2. This study is the first simultaneous evaluation of the W-fuzz growth and quantification of the helium retention in the large-sized plasma confinement device. Keywords: W-fuzz, TEM observation, Ion beam analysis, LHD
Initial growth phase of W-fuzz formation in ultra-long pulse helium discharge in LHD
M. Tokitani (Autor:in) / S. Masuzaki (Autor:in) / H. Kasahara (Autor:in) / Y. Yoshimura (Autor:in) / R. Sakamoto (Autor:in) / N. Yoshida (Autor:in) / Y. Ueda (Autor:in) / T. Mutoh (Autor:in) / S. Nagata (Autor:in)
2017
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
A model of ballistic helium transport during helium-induced fuzz growth in tungsten
| DOAJ | 2023
Temperature dependent study of helium retention in tungsten fuzz surfaces
| DOAJ | 2023
Trapping and release of deuterium in helium-induced tungsten fuzz at low temperature
| Elsevier | 2025
Trapping and release of deuterium in helium-induced tungsten fuzz at low temperature
| DOAJ | 2025
Tungsten fuzz growth at low temperatures (<900 K) on a surface with nanocones
| DOAJ | 2024