Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Chemical Oxygen Demand (COD) and Total Suspended Solid (TSS) Removal from Rubber Wastewater Factory Using Electrocoagulation Technique
Rubber industrial wastewater is obtained during washing, shredding, grinding, crumbbing, drying, and pressing bokar. The wastewater produced can be an environmental pollutant because it contains relatively large amounts of organic matter. One alternative to treating rubber wastewater is to use the electrocoagulation process, which is a combination of the coagulation and electrolysis processes. This electrocoagulation process has several advantages in the form of simple equipment, short time, produces odorless wastewater, does not require large areas of land, and can remove various contaminants in water. In this study, rubber wastewater was treated by electrocoagulation using a batch system with variations in the contact time used, namely 20, 40, 60, 80, and 100 minutes. This type of research is experimental research, and descriptive analysis is carried out. Rubber wastewater is physically gray-black before treatment and chemically contains large organic matter. The results of this study showed that the content of chemical oxygen demand (COD) and total suspended solids (TSS) before processing had values of 691 mg/L and 317 mg/L. Optimum conditions for the elimination of COD and TSS contents were achieved within 80 minutes with the percentage of elimination being 89% and 85%.
Chemical Oxygen Demand (COD) and Total Suspended Solid (TSS) Removal from Rubber Wastewater Factory Using Electrocoagulation Technique
Rubber industrial wastewater is obtained during washing, shredding, grinding, crumbbing, drying, and pressing bokar. The wastewater produced can be an environmental pollutant because it contains relatively large amounts of organic matter. One alternative to treating rubber wastewater is to use the electrocoagulation process, which is a combination of the coagulation and electrolysis processes. This electrocoagulation process has several advantages in the form of simple equipment, short time, produces odorless wastewater, does not require large areas of land, and can remove various contaminants in water. In this study, rubber wastewater was treated by electrocoagulation using a batch system with variations in the contact time used, namely 20, 40, 60, 80, and 100 minutes. This type of research is experimental research, and descriptive analysis is carried out. Rubber wastewater is physically gray-black before treatment and chemically contains large organic matter. The results of this study showed that the content of chemical oxygen demand (COD) and total suspended solids (TSS) before processing had values of 691 mg/L and 317 mg/L. Optimum conditions for the elimination of COD and TSS contents were achieved within 80 minutes with the percentage of elimination being 89% and 85%.
Chemical Oxygen Demand (COD) and Total Suspended Solid (TSS) Removal from Rubber Wastewater Factory Using Electrocoagulation Technique
Andika Munandar (Autor:in) / Khairratul Nabila (Autor:in) / Rifka Noor Azizah (Autor:in)
2023
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
| British Library Conference Proceedings | 2015
Removal of Pharmaceuticals from Wastewater by Intermittent Electrocoagulation
| DOAJ | 2017
Removal of chromium (III) from wastewater by electrocoagulation method
| Online Contents | 2014
Removal of chromium (III) from wastewater by electrocoagulation method
| Springer Verlag | 2014