Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Tensile analysis of loop joints with different overlap lengths
In order to achieve rapid bridge construction, on-site wet joint joining techniques for prefabricated bridge decks are commonly used. The primary method involves mainly lap welding, but this form poses some drawbacks such as difficult lap jointing of two steel bars and a hefty welding workload. To address these issues, this study conducts model experiments on the unwelded structure of loop joints. We compare and analyze the displacement, crack distribution, crack development process, and strain variability of loop joints across three different overlap lengths, along with one type of straight bar lap-welded wet joints. It is observed that, despite the comparable ultimate tensile capacity of loop joints with the main rib to that of the welded wet joint with the main rib, the failure mode varies, and the crack direction changes with the overlap length. From a structural stress perspective, if the U-bar of the loop joint meets a specific overlap length, the wet joint adequately fulfills stress requirements and can be applied in practical engineering.
Tensile analysis of loop joints with different overlap lengths
In order to achieve rapid bridge construction, on-site wet joint joining techniques for prefabricated bridge decks are commonly used. The primary method involves mainly lap welding, but this form poses some drawbacks such as difficult lap jointing of two steel bars and a hefty welding workload. To address these issues, this study conducts model experiments on the unwelded structure of loop joints. We compare and analyze the displacement, crack distribution, crack development process, and strain variability of loop joints across three different overlap lengths, along with one type of straight bar lap-welded wet joints. It is observed that, despite the comparable ultimate tensile capacity of loop joints with the main rib to that of the welded wet joint with the main rib, the failure mode varies, and the crack direction changes with the overlap length. From a structural stress perspective, if the U-bar of the loop joint meets a specific overlap length, the wet joint adequately fulfills stress requirements and can be applied in practical engineering.
Tensile analysis of loop joints with different overlap lengths
Kai Wang (Autor:in) / Gang Liu (Autor:in) / Congquan Wang (Autor:in) / Fenglin Wang (Autor:in)
2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
| British Library Online Contents | 2017
Inelastic fracture of adhesively bonded overlap joints
| British Library Online Contents | 2010
Current understanding of completely overlap tubular joints
| British Library Conference Proceedings | 1998
Hysteretic behavior of completely overlap tubular joints
| Online Contents | 2001