Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Finite Element Analysis of SS316L-Based Five-Hole Plate Implant For Fibula Reconstruction
This study analyzed the design performance of SS316L-based plate implant for fibula restoration using a Finite Element Analysis approach. The simulated model design has dimensions of 35 x 5 x 1.5 mm and five holes with 2-3 configuration. The results of the bending test simulation showed that the values for both displacement and Von Mises stress that occurred (0.008 mm and 116 MPa of each) were still considerably below the yield stress of the SS316L material. The same results were also shown in the tensile test simulation, although the clamping setting on the plate was changed on the other side. From this finite element analysis approach, the SS316L-based five-hole plate implant design has a fairly good strength performance as a fibular bone-implant restoration product.
Finite Element Analysis of SS316L-Based Five-Hole Plate Implant For Fibula Reconstruction
This study analyzed the design performance of SS316L-based plate implant for fibula restoration using a Finite Element Analysis approach. The simulated model design has dimensions of 35 x 5 x 1.5 mm and five holes with 2-3 configuration. The results of the bending test simulation showed that the values for both displacement and Von Mises stress that occurred (0.008 mm and 116 MPa of each) were still considerably below the yield stress of the SS316L material. The same results were also shown in the tensile test simulation, although the clamping setting on the plate was changed on the other side. From this finite element analysis approach, the SS316L-based five-hole plate implant design has a fairly good strength performance as a fibular bone-implant restoration product.
Finite Element Analysis of SS316L-Based Five-Hole Plate Implant For Fibula Reconstruction
Nanang Qosim (Autor:in) / Zakki Fuadi Emzain (Autor:in) / AM. Mufarrih (Autor:in) / Ratna Monasari (Autor:in) / Fataa Kusumattaqiin (Autor:in) / Rangga E. Santoso (Autor:in)
2022
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Laser rapid forming of SS316L/Rene88DT graded material
| British Library Online Contents | 2005
Peronea Magna: An Important Anatomic Variant Impacting Fibula‐Free Flap Reconstruction
| Wiley | 2024
Influence of Nano-Al2O3-Mg-SiC on SS316L Perforated Clad Plate: Microstructure and Interfacial Study
| Springer Verlag | 2024
Influence of Nano-Al2O3-Mg-SiC on SS316L Perforated Clad Plate: Microstructure and Interfacial Study
| Springer Verlag | 2024