Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Gasification of RDF and Its Components with Tire Pyrolysis Char as Tar-Cracking Catalyst
The composition of gas produced by the gasification of refuse-derived fuel (RDF) can be affected by the content of individual components of RDF and their mutual interactions. In this work, plastics, paper, wood, textile and RDF were gasified in a two-stage gasification system and the obtained tar yields and product gas quality were compared. The two-stage reactor consisted of an air-blown gasifier and a catalytic reactor filled with carbonized tire pyrolysis char as the tar-cracking catalyst. Tire pyrolysis char is a promising alternative to expensive catalysts. The impact of temperature and catalyst amount on the tar yield and gas composition was investigated. Theoretical oxygen demand for all material classes was calculated and its effect on gas composition and tar yield is discussed. The results indicate that the gasification of plastics produces the highest amount of tar and hydrocarbon gases, while the CO2 content of the product gas remains the lowest compared to all other materials. On the other hand, the paper fraction produced hydrogen-rich gas with low tar content. The gasification of RDF at 700 °C provided the lowest tar yield compared to all other materials, indicating positive synergic effects of lignocellulosic biomass and plastics in tar reduction. The significance of these interactions was suppressed at the highest temperature of 900 °C, as the thermal cracking of tar became dominant. For CO2 content, a negative synergic effect (higher CO2 concentration) was observed.
Gasification of RDF and Its Components with Tire Pyrolysis Char as Tar-Cracking Catalyst
The composition of gas produced by the gasification of refuse-derived fuel (RDF) can be affected by the content of individual components of RDF and their mutual interactions. In this work, plastics, paper, wood, textile and RDF were gasified in a two-stage gasification system and the obtained tar yields and product gas quality were compared. The two-stage reactor consisted of an air-blown gasifier and a catalytic reactor filled with carbonized tire pyrolysis char as the tar-cracking catalyst. Tire pyrolysis char is a promising alternative to expensive catalysts. The impact of temperature and catalyst amount on the tar yield and gas composition was investigated. Theoretical oxygen demand for all material classes was calculated and its effect on gas composition and tar yield is discussed. The results indicate that the gasification of plastics produces the highest amount of tar and hydrocarbon gases, while the CO2 content of the product gas remains the lowest compared to all other materials. On the other hand, the paper fraction produced hydrogen-rich gas with low tar content. The gasification of RDF at 700 °C provided the lowest tar yield compared to all other materials, indicating positive synergic effects of lignocellulosic biomass and plastics in tar reduction. The significance of these interactions was suppressed at the highest temperature of 900 °C, as the thermal cracking of tar became dominant. For CO2 content, a negative synergic effect (higher CO2 concentration) was observed.
Gasification of RDF and Its Components with Tire Pyrolysis Char as Tar-Cracking Catalyst
Patrik Šuhaj (Autor:in) / Jakub Husár (Autor:in) / Juma Haydary (Autor:in)
2020
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Gasification of char from sludge pyrolysis
| British Library Conference Proceedings | 1994
Gasification of char from wastewater solids pyrolysis
| Wiley | 1998
Gasification of char from wastewater solids pyrolysis
| Wiley | 1998