Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Simulation of an Oxic-Settling-Anaerobic Pilot Plant Operated under Real Conditions Using the Activated Sludge Model No.2d
Oxic-settling-anaerobic (OSA) process has been introduced into the treatment line of wastewater in order to upgrade activated sludge processes and to reduce the production of excess sludge. The aim of the present study was to simulate the performance of an OSA pilot plant by implementing the Activated Sludge Model No.2d (ASM2d) into a mathematical modelling software (BioWin). The stepwise calibration, performed both by off-line experiments and software dynamic calibration, was carried out in a heuristic way, adjusting the parameters values that showed a major influence to the effluent and internal concentrations. All the reduction factors introduced into ASM2d to simulate the processes occurring in anoxic and anaerobic conditions were lowered in order to reproduce the concentrations of interest. In addition, the values of parameters of the PAOs (polyphosphate accumulating organisms)-related process (namely qPHA and YPO4) were found lower than those usually adopted. In general, theoretical results were in good agreement with the experimental data obtained from plant’s operation, showing an accurate predictive capacity of the model. Good performance was achieved considering the phosphorus removal related process, while some failures were detected in COD and ammonia simulations.
Simulation of an Oxic-Settling-Anaerobic Pilot Plant Operated under Real Conditions Using the Activated Sludge Model No.2d
Oxic-settling-anaerobic (OSA) process has been introduced into the treatment line of wastewater in order to upgrade activated sludge processes and to reduce the production of excess sludge. The aim of the present study was to simulate the performance of an OSA pilot plant by implementing the Activated Sludge Model No.2d (ASM2d) into a mathematical modelling software (BioWin). The stepwise calibration, performed both by off-line experiments and software dynamic calibration, was carried out in a heuristic way, adjusting the parameters values that showed a major influence to the effluent and internal concentrations. All the reduction factors introduced into ASM2d to simulate the processes occurring in anoxic and anaerobic conditions were lowered in order to reproduce the concentrations of interest. In addition, the values of parameters of the PAOs (polyphosphate accumulating organisms)-related process (namely qPHA and YPO4) were found lower than those usually adopted. In general, theoretical results were in good agreement with the experimental data obtained from plant’s operation, showing an accurate predictive capacity of the model. Good performance was achieved considering the phosphorus removal related process, while some failures were detected in COD and ammonia simulations.
Simulation of an Oxic-Settling-Anaerobic Pilot Plant Operated under Real Conditions Using the Activated Sludge Model No.2d
Rosa Vitanza (Autor:in) / Angelo Cortesi (Autor:in) / Vittorino Gallo (Autor:in) / Maria E. De Arana (Autor:in) / Ioanna A. Vasiliadou (Autor:in)
2021
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
The Research Progress on Oxic-Settling-Anaerobic Sludge Reduction Process
| British Library Conference Proceedings | 2014
Mechanism on minimization of excess sludge in oxic-settling-anaerobic (OSA) process
| Springer Verlag | 2008
| DOAJ | 2023
Microbial Community Analysis on Oxic-Settling-Anaerobic Process by Using PCR-DGGE Assay
| British Library Conference Proceedings | 2011