Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Removal of Arsenate from Contaminated Water via Combined Addition of Magnesium-Based and Calcium-Based Adsorbents
The effects of the combined addition of Mg- and Ca-based adsorbents (MgO, Mg(OH)2, MgCO3, CaO, Ca(OH)2, and CaCO3) were systematically tested for improving arsenic-removal performance and inhibiting the leaching of base material components from the adsorbent. Arsenic-removal tests were conducted with each single type or combination of two types of adsorbents. Results obtained after the combined-addition tests were compared with those obtained from the single-addition test with each adsorbent. The arsenic-removal performance improved in most combined additions but decreased in certain combined additions of MgO or Mg(OH)2 with Ca-based adsorbents. The arsenic-removal performance of the combined addition of MgCO3 and Ca(OH)2 was the highest. The combination of Mg-based adsorbents with CaO or Ca(OH)2 inhibited Mg-leaching, whereas that of CaO or Ca(OH)2 with MgCO3 inhibited Ca-leaching. Improvement in arsenic-removal performance for the combination of MgCO3 with CaO or Ca(OH)2 was caused by the incorporation and co-precipitation with arsenic when Mg(OH)2 and CaCO3 were produced. MgCO3-Ca(OH)2 and MgCO3-CaO are recommended for both arsenic removal and environmental adsorbent stability that can be effectively applied over a wide range of arsenic concentrations.
Removal of Arsenate from Contaminated Water via Combined Addition of Magnesium-Based and Calcium-Based Adsorbents
The effects of the combined addition of Mg- and Ca-based adsorbents (MgO, Mg(OH)2, MgCO3, CaO, Ca(OH)2, and CaCO3) were systematically tested for improving arsenic-removal performance and inhibiting the leaching of base material components from the adsorbent. Arsenic-removal tests were conducted with each single type or combination of two types of adsorbents. Results obtained after the combined-addition tests were compared with those obtained from the single-addition test with each adsorbent. The arsenic-removal performance improved in most combined additions but decreased in certain combined additions of MgO or Mg(OH)2 with Ca-based adsorbents. The arsenic-removal performance of the combined addition of MgCO3 and Ca(OH)2 was the highest. The combination of Mg-based adsorbents with CaO or Ca(OH)2 inhibited Mg-leaching, whereas that of CaO or Ca(OH)2 with MgCO3 inhibited Ca-leaching. Improvement in arsenic-removal performance for the combination of MgCO3 with CaO or Ca(OH)2 was caused by the incorporation and co-precipitation with arsenic when Mg(OH)2 and CaCO3 were produced. MgCO3-Ca(OH)2 and MgCO3-CaO are recommended for both arsenic removal and environmental adsorbent stability that can be effectively applied over a wide range of arsenic concentrations.
Removal of Arsenate from Contaminated Water via Combined Addition of Magnesium-Based and Calcium-Based Adsorbents
Hajime Sugita (Autor:in) / Terumi Oguma (Autor:in) / Junko Hara (Autor:in) / Ming Zhang (Autor:in) / Yoshishige Kawabe (Autor:in)
2023
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Simultaneous Removal of Arsenate and Fluoride Using Magnesium-Based Adsorbents
| DOAJ | 2024
| British Library Conference Proceedings | 2016
Removal of fluoride from water using titanium-based adsorbents
| Springer Verlag | 2010
Zirconia Pillared Montmorillonite for Removal of Arsenate from Water
| Online Contents | 2005
XANES evidence of arsenate removal from water with magnetic ferrite
| Online Contents | 2013