Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
The paper deals with the wind action on flat roofs of rectangular shapes which can be considered for medium-rise and high-rise buildings. Distributions of mean pressure coefficient Cp on flat roofs were measured. All analyses were based on model measurements which had been performed in the boundary layer wind tunnel in Wind Engineering Laboratory of Cracow University of Technology. Vertical, fixed in the floor of the wind tunnel on the turn table rectangular prisms of the ratio of cross-section dimensions 1:2 and 1:4 were investigated. Measurements were carried out for the angle of wind attack in the range 0°-90°, every 15°. The influence of the wind structure on pressures was investigated in six different cases of the approaching wind.
The paper deals with the wind action on flat roofs of rectangular shapes which can be considered for medium-rise and high-rise buildings. Distributions of mean pressure coefficient Cp on flat roofs were measured. All analyses were based on model measurements which had been performed in the boundary layer wind tunnel in Wind Engineering Laboratory of Cracow University of Technology. Vertical, fixed in the floor of the wind tunnel on the turn table rectangular prisms of the ratio of cross-section dimensions 1:2 and 1:4 were investigated. Measurements were carried out for the angle of wind attack in the range 0°-90°, every 15°. The influence of the wind structure on pressures was investigated in six different cases of the approaching wind.
Wind action on flat roofs
Tomasz Lipecki (Autor:in)
2014
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Engineering Index Backfile | 1936
|Engineering Index Backfile | 1936
|Wind Pressures on Parapets of Flat Roofs
British Library Online Contents | 2002
|Wind Pressures on Parapets of Flat Roofs
Online Contents | 2002
|Design wind loads for beams supporting flat roofs
Elsevier | 1992
|