Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Synthesis, thermal properties and electrical conductivity of phosphoric acid-based geopolymer with metakaolin
Abstract In this work, kaolin was used to prepare a geopolymer from a phosphoric acid solution. Microstructural properties were investigated by X-ray powder diffraction, while thermal properties were evaluated by differential thermal analysis and thermogravimetry. Finally, the electrical conductivity of the geopolymer and its dielectric properties were investigated. The results showed that the onset temperature of crystallization of the zeolite phase occurred at 180 °C. This phase was converted into phosphocristobalite phase at 300 °C and persisted until 1400 °C. From the temperature of 700 °C, a new crystalline phase was observed: the tridymite SiO2. The amount of phosphocristobalite and tridymite crystals reached a maximum at approximately 1100 °C, then, at 1400 °C, the X-ray diagram showed that the peak presented a weak intensity due to the partial dissolution of two solid crystalline phases: tridymite and cristobalite. The electrical conduction properties of the geopolymer indicated first a very low solid-state conductivity (σ ≈ 10−10 S.cm−1), and then above 625 °C, the conductivity began to rise rapidly, reaching 10−7 S.cm−1.
Highlights Kaolin with muscovite as impurity were used to prepare acid-based geopolymer. The geopolymer crystallized at low temperature. The dielectric loss from ion transfer was negligible by decreasing free water. The conductivity value was σ ≈ 10−10 S.cm−1, above 625 °C it became 10−7 S.cm−1. This material could have different applications at high temperatures.
Synthesis, thermal properties and electrical conductivity of phosphoric acid-based geopolymer with metakaolin
Abstract In this work, kaolin was used to prepare a geopolymer from a phosphoric acid solution. Microstructural properties were investigated by X-ray powder diffraction, while thermal properties were evaluated by differential thermal analysis and thermogravimetry. Finally, the electrical conductivity of the geopolymer and its dielectric properties were investigated. The results showed that the onset temperature of crystallization of the zeolite phase occurred at 180 °C. This phase was converted into phosphocristobalite phase at 300 °C and persisted until 1400 °C. From the temperature of 700 °C, a new crystalline phase was observed: the tridymite SiO2. The amount of phosphocristobalite and tridymite crystals reached a maximum at approximately 1100 °C, then, at 1400 °C, the X-ray diagram showed that the peak presented a weak intensity due to the partial dissolution of two solid crystalline phases: tridymite and cristobalite. The electrical conduction properties of the geopolymer indicated first a very low solid-state conductivity (σ ≈ 10−10 S.cm−1), and then above 625 °C, the conductivity began to rise rapidly, reaching 10−7 S.cm−1.
Highlights Kaolin with muscovite as impurity were used to prepare acid-based geopolymer. The geopolymer crystallized at low temperature. The dielectric loss from ion transfer was negligible by decreasing free water. The conductivity value was σ ≈ 10−10 S.cm−1, above 625 °C it became 10−7 S.cm−1. This material could have different applications at high temperatures.
Synthesis, thermal properties and electrical conductivity of phosphoric acid-based geopolymer with metakaolin
Sellami, Mouna (Autor:in) / Barre, Maud (Autor:in) / Toumi, Mohamed (Autor:in)
Applied Clay Science ; 180
19.06.2019
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Fire resistance of phosphoric acid activated metakaolin geopolymer
| Elsevier | 2024
Antibacterial Metakaolin-Based Geopolymer Cement
| Springer Verlag | 2017