Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Effect of the content of ball-milled expanded graphite on the bending and tribological properties of copper–graphite composites
Highlights ► Ball-milled expanded graphite is used as lubricant in copper–graphite composites. ► Ball-milled expanded graphite can be produced easily. ► Ball-milled expanded graphite is an effective solid lubricant. ► Ball-milled expanded is benefital for the bending strength of the composites.
Abstract Copper–graphite composites with different amounts of ball-milled expanded graphite (EG) were prepared through powder metallurgy. The composites were consolidated at 400MPa for 60s and then sintered for 2h at 850°C under vacuum condition. The bending and tribological properties of the composites were investigated. The bending strength of the composites decreases from 226.31MPa at 3wt.% ball-milled EG content to 85.61MPa at 12wt.% ball-milled EG content. The friction coefficient of the composites decreases from 0.3012 at 3wt.% ball-milled EG content to 0.0973 at 6wt.% ball-milled EG content, above which the friction coefficient increases slightly. The wear rate of the composites decreases with increasing ball-milled EG content and reaches a minimum value of 2.1×10−3 mm3/m at 6wt.% ball-milled EG content, above which the wear rate of the composites also increases slightly.
Effect of the content of ball-milled expanded graphite on the bending and tribological properties of copper–graphite composites
Highlights ► Ball-milled expanded graphite is used as lubricant in copper–graphite composites. ► Ball-milled expanded graphite can be produced easily. ► Ball-milled expanded graphite is an effective solid lubricant. ► Ball-milled expanded is benefital for the bending strength of the composites.
Abstract Copper–graphite composites with different amounts of ball-milled expanded graphite (EG) were prepared through powder metallurgy. The composites were consolidated at 400MPa for 60s and then sintered for 2h at 850°C under vacuum condition. The bending and tribological properties of the composites were investigated. The bending strength of the composites decreases from 226.31MPa at 3wt.% ball-milled EG content to 85.61MPa at 12wt.% ball-milled EG content. The friction coefficient of the composites decreases from 0.3012 at 3wt.% ball-milled EG content to 0.0973 at 6wt.% ball-milled EG content, above which the friction coefficient increases slightly. The wear rate of the composites decreases with increasing ball-milled EG content and reaches a minimum value of 2.1×10−3 mm3/m at 6wt.% ball-milled EG content, above which the wear rate of the composites also increases slightly.
Effect of the content of ball-milled expanded graphite on the bending and tribological properties of copper–graphite composites
Wang, Jianxin (Autor:in) / Zhang, Ruijun (Autor:in) / Xu, Jiang (Autor:in) / Wu, Chao (Autor:in) / Chen, Peng (Autor:in)
03.01.2013
5 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
| British Library Online Contents | 2013
Performance of Expanded Graphite and Expanded Milled-Graphite Fillers in Thermosetting Resins
| British Library Online Contents | 2005
Powder properties of hydrogenated ball-milled graphite
| British Library Online Contents | 2014
| British Library Online Contents | 2012
Ball-Milled Graphite-Tin Composite Anode Materials for Lithium-Ion Battery
| British Library Online Contents | 2013