Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Basic creep of concrete under compression, tension and bending
Highlights ► Experimental setups developed to achieve direct tensile and bending creeps are presented. ► Precautions taken to obtain relevant data are described. ► Results are available for specimens subjected to 50% of the strength in tension. ► Final discussion compares the basic creep under tension, bending and compression. ► The analysis of results highlights considerable coupling between shrinkage and tensile creep.
Abstract Investigations on concrete creep are often limited to the compression behavior due to the difficulty of performing tensile tests on cement-based materials. This paper describes the experimental setup developed to achieve direct tensile and bending concrete creep. The precautions taken to obtain relevant data are described. For comparison, tensile, flexural and compressive basic creep test were conducted in parallel. Although the approach is still controversial, the basic creep strain was determined by subtracting the shrinkage strain and instantaneous strain from the total strain. Results available for specimens subjected to 50% of the strength in tension or in compression are presented. The final discussion compares the basic creep under the different types of loading.
Basic creep of concrete under compression, tension and bending
Highlights ► Experimental setups developed to achieve direct tensile and bending creeps are presented. ► Precautions taken to obtain relevant data are described. ► Results are available for specimens subjected to 50% of the strength in tension. ► Final discussion compares the basic creep under tension, bending and compression. ► The analysis of results highlights considerable coupling between shrinkage and tensile creep.
Abstract Investigations on concrete creep are often limited to the compression behavior due to the difficulty of performing tensile tests on cement-based materials. This paper describes the experimental setup developed to achieve direct tensile and bending concrete creep. The precautions taken to obtain relevant data are described. For comparison, tensile, flexural and compressive basic creep test were conducted in parallel. Although the approach is still controversial, the basic creep strain was determined by subtracting the shrinkage strain and instantaneous strain from the total strain. Results available for specimens subjected to 50% of the strength in tension or in compression are presented. The final discussion compares the basic creep under the different types of loading.
Basic creep of concrete under compression, tension and bending
Ranaivomanana, Narintsoa (Autor:in) / Multon, Stéphane (Autor:in) / Turatsinze, Anaclet (Autor:in)
Construction and Building Materials ; 38 ; 173-180
04.08.2012
8 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Concrete , Basic creep , Compression , Tension , Bending
Basic creep of concrete under compression, tension and bending
| Online Contents | 2013
Basic creep of concrete under compression, tension and bending
| British Library Online Contents | 2013
Creep in bending, tension and compression-experiments and speculations
| British Library Conference Proceedings | 1997