Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Effect of standoff distance on coating deposition characteristics in cold spraying
AbstractIn this study, the effect of standoff distance on coating deposition characteristics in cold spraying in cold spraying was investigated by the experiment and numerical simulation of particle acceleration. Al, Ti and Cu powders of different sizes were used as feedstocks. It was found that the deposition efficiency was decreased with the increase of standoff distance from 10mm to 110mm for both Al and Ti powders used in this study. However, for Cu powders, the maximum deposition efficiency was obtained at the standoff distance of 30mm, and then the deposition efficiency decreased with further increasing the standoff distance to 110mm. The standoff distance had a little effect on coating microstructure and microhardness for these three powders. Both the stain-hardening effect of the deposited particles and the shot-peening effect of the rebounded particles take the roles in coating hardness. It was also found that the surface of substrate or previously deposited coating could be exposed to a relatively high gas temperature at a short standoff distance.
Effect of standoff distance on coating deposition characteristics in cold spraying
AbstractIn this study, the effect of standoff distance on coating deposition characteristics in cold spraying in cold spraying was investigated by the experiment and numerical simulation of particle acceleration. Al, Ti and Cu powders of different sizes were used as feedstocks. It was found that the deposition efficiency was decreased with the increase of standoff distance from 10mm to 110mm for both Al and Ti powders used in this study. However, for Cu powders, the maximum deposition efficiency was obtained at the standoff distance of 30mm, and then the deposition efficiency decreased with further increasing the standoff distance to 110mm. The standoff distance had a little effect on coating microstructure and microhardness for these three powders. Both the stain-hardening effect of the deposited particles and the shot-peening effect of the rebounded particles take the roles in coating hardness. It was also found that the surface of substrate or previously deposited coating could be exposed to a relatively high gas temperature at a short standoff distance.
Effect of standoff distance on coating deposition characteristics in cold spraying
Li, W.-Y. (Autor:in) / Zhang, C. (Autor:in) / Guo, X.P. (Autor:in) / Zhang, G. (Autor:in) / Liao, H.L. (Autor:in) / Li, C.-J. (Autor:in) / Coddet, C. (Autor:in)
12.02.2007
8 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Effect of standoff distance on coating deposition characteristics in cold spraying
| British Library Online Contents | 2008
| British Library Online Contents | 2007
Ladder standoff and ladder incorporating the standoff
| Europäisches Patentamt | 2021
Ladder Standoff and Ladder Incorporating the Standoff
| Europäisches Patentamt | 2020
| Europäisches Patentamt | 2023