Differentiation of thixotropy from damage for accurately characterizing fatigue resistance of asphalt binder: Fid-Bau Portal

Differentiation of thixotropy from damage for accurately characterizing fatigue resistance of asphalt binder

Lv, Huijie / Tan, Yiqiu / Zhang, Derun / Li, Guannan

Highlights • Investigated the effects of damage and thixotropy on viscoelastic parameters; • Obtained a linear relationship between ${(G *)}^{E}$ and $θ$ under the influence of thixotropy; • Developed a thixotropy model to characterize the change of ${(G *)}^{E}$ under the influence of thixotropy; • Calculated damaged density separating the influence of thixotropy.

Abstract Accurate characterization of the fatigue resistance of asphalt binder is of great significance to the prediction of asphalt pavement performance. Traditionally, apparent changes in viscoelastic parameters, including dynamic shear modulus and phase angle, with the number of loading cycles are used to define the fatigue performance of the asphalt binder. However, thixotropy also leads to changes in these viscoelastic parameters, and its contribution is not yet well understood. This study develops a method to quantify the effects of damage and thixotropy on the changes of viscoelastic parameters under the cyclic stress-controlled loading mode. The new method includes the four key steps: (1) determining the thixotropy influence-dominated phase; (2) establishing a thixotropy model to characterize the influence of thixotropy on the effective dynamic shear modulus; (3) calculating damage density from the apparent and effective dynamic shear moduli; and (4) characterizing thixotropy behavior based on Black space diagram. The effectiveness of the newly developed method is verified by the time sweep test, which is conducted on two types of asphalt binder under varying stress levels.with a loading frequency of 10 Hz and a test temperature of 25 °C. The results show that: (1) the change of dynamic shear modulus is resulted from the damage and thixotropy, while that of phase angle is only caused by the thixotropy; (2) thixotropy leads to the decrease of dynamic shear modulus and increase of phase angle; and its influence on viscoelastic parameters increases with the loading time and stress level increased; (3) under the influence of thixotropy, the dynamic shear modulus is linearly related to the phase angle, which is independent of the stress level applied and the damage accumulated in the asphalt binder.