Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns: Fid-Bau Portal

Fachinformationsdienst BAUdigital

Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik

Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns

Liu, Dalin / Gho, Wie-Min

AbstractThis paper presents an experimental investigation into the axial load behaviour of rectangular concrete-filled steel tubular (CFT) stub columns. A total of 26 specimens were tested under concentric compression. The primary test parameters were material strengths ( ${f^{'}}_{c} = 55 - 106$ MPa; fy=300 and 495MPa) and cross-sectional aspect ratio (1.0–2.0). Favourable ductility performance was observed for all specimens during the tests. A comparison of axial load capacity between the tests and the design codes shows that ACI and AISC give safe estimation by 7 and 8%, respectively. On the other hand, EC4 overestimates the ultimate capacity of the specimens fabricated from mild steel and high-strength concrete. A fibre model is developed to evaluate the axial load behaviour of the specimens. Calibration of the model against the test data suggests that it can closely predict the non-linear behaviour of high-strength rectangular CFT stub columns.

Zugriff

Zugriff prüfen

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns

Liu, Dalin / Gho, Wie-Min

AbstractThis paper presents an experimental investigation into the axial load behaviour of rectangular concrete-filled steel tubular (CFT) stub columns. A total of 26 specimens were tested under concentric compression. The primary test parameters were material strengths ( ${f^{'}}_{c} = 55 - 106$ MPa; fy=300 and 495MPa) and cross-sectional aspect ratio (1.0–2.0). Favourable ductility performance was observed for all specimens during the tests. A comparison of axial load capacity between the tests and the design codes shows that ACI and AISC give safe estimation by 7 and 8%, respectively. On the other hand, EC4 overestimates the ultimate capacity of the specimens fabricated from mild steel and high-strength concrete. A fibre model is developed to evaluate the axial load behaviour of the specimens. Calibration of the model against the test data suggests that it can closely predict the non-linear behaviour of high-strength rectangular CFT stub columns.

Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns

Liu, Dalin / Gho, Wie-Min

AbstractThis paper presents an experimental investigation into the axial load behaviour of rectangular concrete-filled steel tubular (CFT) stub columns. A total of 26 specimens were tested under concentric compression. The primary test parameters were material strengths ( ${f^{'}}_{c} = 55 - 106$ MPa; fy=300 and 495MPa) and cross-sectional aspect ratio (1.0–2.0). Favourable ductility performance was observed for all specimens during the tests. A comparison of axial load capacity between the tests and the design codes shows that ACI and AISC give safe estimation by 7 and 8%, respectively. On the other hand, EC4 overestimates the ultimate capacity of the specimens fabricated from mild steel and high-strength concrete. A fibre model is developed to evaluate the axial load behaviour of the specimens. Calibration of the model against the test data suggests that it can closely predict the non-linear behaviour of high-strength rectangular CFT stub columns.

Zugriff

Zugriff prüfen

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Dokumentinformationen

Titel:

Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns

Beteiligte:

Liu, Dalin (Autor:in) / Gho, Wie-Min (Autor:in)

Erschienen in:

Thin-Walled Structures ; 43 ; 1131-1142

Erscheinungsdatum:

31.03.2005

Format / Umfang:

12 pages

ISSN:

DOI:

https://doi.org/10.1016/j.tws.2005.03.007

Medientyp:

Aufsatz (Zeitschrift)

Format:

Elektronische Ressource

Sprache:

Englisch

Schlagwörter:

Axial loading , CFT column , Concrete , High-strength , Steel

Ähnliche Titel

Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns

Liu, Dalin | Online Contents | 2005

Axial compression behaviour of rectangular recycled aggregate concrete-filled steel tubular stub columns

Yang, Dongdong / Liu, Faqi / Wang, Yuyin | Elsevier | 2022

Design Model of Rectangular Concrete-Filled Steel Tubular Stub Columns under Axial Compression

Faesal Alatshan / Siti Aminah Osman / Abdelmajeed Altlomate et al. | DOAJ | 2023

Freier Zugriff

Post-fire behaviour of circular high-strength concrete-filled high-strength steel tubular stub columns under axial compression

Li, Ying / Liu, Faqi / Pan, Yanchong et al. | Elsevier | 2025

Fire behaviour of high strength self-consolidating concrete filled steel tubular stub columns

Lu, Hui / Zhao, Xiao-Ling / Han, Lin-Hai | Elsevier | 2009