Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Axial crushing of thin-walled structures with origami patterns
Abstract Thin-walled tubes are a kind of popular design for the energy absorbing devices. However, when they are subjected to axial loading, there exists a large undesirable initial peak force, followed by fluctuation in the force–displacement curve. In this paper, the origami patterns are introduced to thin-walled tubes to minimize the initial peak and the subsequent fluctuations. Tubes of square, hexagonal and octagonal cross-sections with origami patterns are investigated by finite element analysis. Numerical results show that compared with the conventional tube, the patterned tubes exhibit a lower initial peak force and more uniform crushing load. The critical states are obtained under which the crushing mode follows the initial origami pattern. The parametric study shows the relationship between the pre-folding angle and the initial peak force as well as the mean crushing force for the tubes with different cross-sections. A prototype of the patterned tube is constructed and tested, showing much lower initial peak force and a smooth crushing process which agrees with the numerical results.
Highlights ► We introduce origami patterns to thin-walled structures and study their axial crushing. ► Patterned tubes with square, hexagonal and octagonal sections are studied using FEA. ► The peak force decreases as patterns are introduced and the force fluctuates much less. ► A critical initial angle is used to govern if the crushing mode follows the initial pattern. ► An experiment was conducted which verified the idea.
Axial crushing of thin-walled structures with origami patterns
Abstract Thin-walled tubes are a kind of popular design for the energy absorbing devices. However, when they are subjected to axial loading, there exists a large undesirable initial peak force, followed by fluctuation in the force–displacement curve. In this paper, the origami patterns are introduced to thin-walled tubes to minimize the initial peak and the subsequent fluctuations. Tubes of square, hexagonal and octagonal cross-sections with origami patterns are investigated by finite element analysis. Numerical results show that compared with the conventional tube, the patterned tubes exhibit a lower initial peak force and more uniform crushing load. The critical states are obtained under which the crushing mode follows the initial origami pattern. The parametric study shows the relationship between the pre-folding angle and the initial peak force as well as the mean crushing force for the tubes with different cross-sections. A prototype of the patterned tube is constructed and tested, showing much lower initial peak force and a smooth crushing process which agrees with the numerical results.
Highlights ► We introduce origami patterns to thin-walled structures and study their axial crushing. ► Patterned tubes with square, hexagonal and octagonal sections are studied using FEA. ► The peak force decreases as patterns are introduced and the force fluctuates much less. ► A critical initial angle is used to govern if the crushing mode follows the initial pattern. ► An experiment was conducted which verified the idea.
Axial crushing of thin-walled structures with origami patterns
Song, Jie (Autor:in) / Chen, Yan (Autor:in) / Lu, Guoxing (Autor:in)
Thin-Walled Structures ; 54 ; 65-71
12.02.2012
7 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Axial crushing of thin-walled structures with origami patterns
Online Contents | 2012
|Axial Crushing in a Novel Technique of Thin-Walled Tube
British Library Online Contents | 2014
|Axial Crushing of Thin-Walled Columns with Octagonal Section: Modeling and Design
Tema Archiv | 2009
|