Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
CO2 sequestration using carbonated water injection in depleted naturally fractured reservoirs: A simulation study
Highlights Providing a numerical model to simulate core flooding with water injection and carbonated water injection. validation of simulation model with reliable experimental data for water-wet and mixed wet rocks. Suggesting a new modeling approach to simulate a single matrix block (SMB) in a depleted NFR. Evaluation of EOR and CO2 storage performance using SMB models. Sensitivity analysis for a number of parameters including CO2 concentration, matrix block height, matrix permeability, anisotropy and wettability change.
Abstract In this work, the focus is given to the study of sequestration potential and recovery improvement in depleted NFRs using CWI. Initially a number of CWI experiments on reservoir cores with different wettabilities were modeled to verify physical aspect of the suggested simulation approach. Afterward, a modeling procedure was suggested to make an insight into the engineering parts of this process. In summary, it defined a 3 × 3×3[m3] reservoir rock matrix (a single matrix block, SMB) surrounded by carbonated water in fractures. The numerical aspects of the model were verified by a mesh independent study, in addition. The effects of several key parameters such as anisotropy, permeability, CO2 fraction in water, wettability alteration and block height were studied and compared for matrix blocks with different wettabilities. These effects were studied by incremental oil recovery and the amount of trapped CO2 in the matrix block. As indicated in this study, by implementing CWI, 10.6% incremental oil recovery can be achieved for a water-wet sample and 4.7% for an oil-wet sample during a period of 10 years. Moreover, about 3000[mol] CO2 were trapped in oil and water of the matrix after 10 years and this was increased to more than 8000[mol] after 100 years for the water-wet matrix block with a volume of 27[m3]. During the same period, by increasing the CO2 concentration from 1% to 2% in CW, oil recovery factor increased by 8.4% in water-wet sample. Subsequently, the amount of trapped CO2 grew from 850 to 3000[mol] in 10 years.
CO2 sequestration using carbonated water injection in depleted naturally fractured reservoirs: A simulation study
Highlights Providing a numerical model to simulate core flooding with water injection and carbonated water injection. validation of simulation model with reliable experimental data for water-wet and mixed wet rocks. Suggesting a new modeling approach to simulate a single matrix block (SMB) in a depleted NFR. Evaluation of EOR and CO2 storage performance using SMB models. Sensitivity analysis for a number of parameters including CO2 concentration, matrix block height, matrix permeability, anisotropy and wettability change.
Abstract In this work, the focus is given to the study of sequestration potential and recovery improvement in depleted NFRs using CWI. Initially a number of CWI experiments on reservoir cores with different wettabilities were modeled to verify physical aspect of the suggested simulation approach. Afterward, a modeling procedure was suggested to make an insight into the engineering parts of this process. In summary, it defined a 3 × 3×3[m3] reservoir rock matrix (a single matrix block, SMB) surrounded by carbonated water in fractures. The numerical aspects of the model were verified by a mesh independent study, in addition. The effects of several key parameters such as anisotropy, permeability, CO2 fraction in water, wettability alteration and block height were studied and compared for matrix blocks with different wettabilities. These effects were studied by incremental oil recovery and the amount of trapped CO2 in the matrix block. As indicated in this study, by implementing CWI, 10.6% incremental oil recovery can be achieved for a water-wet sample and 4.7% for an oil-wet sample during a period of 10 years. Moreover, about 3000[mol] CO2 were trapped in oil and water of the matrix after 10 years and this was increased to more than 8000[mol] after 100 years for the water-wet matrix block with a volume of 27[m3]. During the same period, by increasing the CO2 concentration from 1% to 2% in CW, oil recovery factor increased by 8.4% in water-wet sample. Subsequently, the amount of trapped CO2 grew from 850 to 3000[mol] in 10 years.
CO2 sequestration using carbonated water injection in depleted naturally fractured reservoirs: A simulation study
Motie, Mohadeseh (Autor:in) / Assareh, Mehdi (Autor:in)
29.10.2019
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Water breakthrough simulation in naturally fractured gas reservoirs with water drive
| British Library Online Contents | 2005
Well behavior in naturally fractured reservoirs
| TIBKAT | 1991
Dual-porosity Behaviour of Naturally Fractured Reservoirs
| British Library Online Contents | 1994
Naturally Fractured Tight Gas Reservoirs Detection Optimization
| British Library Conference Proceedings | 1995