Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Vertical and inclined edge-indentation of freshwater ice sheets
AbstractA series of indentation experiments was performed with vertical and downward-breaking inclined indentors in columnar S2 freshwater ice in the ice tank of the Institute for Marine Dynamics. Indentor width (D), indentor angle (α), indentor velocity (V) and ice sheet thickness (h) were varied for a total of 94 tests. Indentor loads, accelerations, displacement, and carriage speed were measured. Significant vibrations were induced in the structure by crushing failure of the ice when the indentor was vertical. Crushing frequency varied proportionately with velocity at low velocities. At higher velocities the response became locked at the natural frequency of thestructure. For the inclined indentation tests, mixed failure modes of crushing and flexural failure were observed. The failure mode underwent a transition from bending to crushing as velocity increased, ice thickness increased, and indentor angle decreased. The horizontal forces exerted on the inclined indentors increased dramatically as the indentor approached vertical.
Vertical and inclined edge-indentation of freshwater ice sheets
AbstractA series of indentation experiments was performed with vertical and downward-breaking inclined indentors in columnar S2 freshwater ice in the ice tank of the Institute for Marine Dynamics. Indentor width (D), indentor angle (α), indentor velocity (V) and ice sheet thickness (h) were varied for a total of 94 tests. Indentor loads, accelerations, displacement, and carriage speed were measured. Significant vibrations were induced in the structure by crushing failure of the ice when the indentor was vertical. Crushing frequency varied proportionately with velocity at low velocities. At higher velocities the response became locked at the natural frequency of thestructure. For the inclined indentation tests, mixed failure modes of crushing and flexural failure were observed. The failure mode underwent a transition from bending to crushing as velocity increased, ice thickness increased, and indentor angle decreased. The horizontal forces exerted on the inclined indentors increased dramatically as the indentor approached vertical.
Vertical and inclined edge-indentation of freshwater ice sheets
Finn, David W. (Autor:in) / Jones, Stephen J. (Autor:in) / Jordaan, Ian J. (Autor:in)
Cold Regions, Science and Technology ; 22 ; 1-18
23.03.1993
18 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Indentation and Splitting of Freshwater Ice Floes
| Online Contents | 1995
Vertical and inclined stirrups
| Engineering Index Backfile | 1946
Mechanical Characterization of Metal Sheets by Means of Double Indentation
| British Library Online Contents | 2007
Direct Punching in Inclined Ultra-High Strength Steel Sheets
| British Library Online Contents | 2014