Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
A comparative study on modified Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict the hot deformation behavior in 28CrMnMoV steel
Highlights ► Three different constitutive models of 28CrMnMoV steel were established. ► The suitability of the three models was compared. ► A five-order polynomial was found suitable to represent the influence of strain.
Abstract The true stress-strain data from isothermal hot compression tests on Gleeble-3500 thermo mechanical simulator, in a wide range of temperatures (1173–1473K) and strain rates (0.01–10s−1), were employed to establish the constitutive equations based on modified Johnson Cook, modified Zerilli–Armstrong, and strain-compensated Arrhenius-type models respectively to predict the high-temperature flow stress of 28CrMnMoV steel. Furthermore, a comparative study has been made on the capability of the three models to represent the elevated temperature flow behavior of this steel. Suitability of the three models were evaluated by comparing the accuracy of prediction of deformation behavior, correlation coefficient, average absolute relative error (AARE) and relative errors of prediction, the number of material constants, and the time needed to evaluate these constants. The results showed that the predicted values by the modified Johnson Cook and Zerilli–Armstrong models could agree well with the experimental values except under the strain rate of 0.01s−1. However, the strain-compensated Arrhenius-type model could track the deformation behavior more accurately throughout the entire temperature and strain rate range.
A comparative study on modified Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict the hot deformation behavior in 28CrMnMoV steel
Highlights ► Three different constitutive models of 28CrMnMoV steel were established. ► The suitability of the three models was compared. ► A five-order polynomial was found suitable to represent the influence of strain.
Abstract The true stress-strain data from isothermal hot compression tests on Gleeble-3500 thermo mechanical simulator, in a wide range of temperatures (1173–1473K) and strain rates (0.01–10s−1), were employed to establish the constitutive equations based on modified Johnson Cook, modified Zerilli–Armstrong, and strain-compensated Arrhenius-type models respectively to predict the high-temperature flow stress of 28CrMnMoV steel. Furthermore, a comparative study has been made on the capability of the three models to represent the elevated temperature flow behavior of this steel. Suitability of the three models were evaluated by comparing the accuracy of prediction of deformation behavior, correlation coefficient, average absolute relative error (AARE) and relative errors of prediction, the number of material constants, and the time needed to evaluate these constants. The results showed that the predicted values by the modified Johnson Cook and Zerilli–Armstrong models could agree well with the experimental values except under the strain rate of 0.01s−1. However, the strain-compensated Arrhenius-type model could track the deformation behavior more accurately throughout the entire temperature and strain rate range.
A comparative study on modified Johnson Cook, modified Zerilli–Armstrong and Arrhenius-type constitutive models to predict the hot deformation behavior in 28CrMnMoV steel
Li, Hong-Ying (Autor:in) / Li, Yang-Hua (Autor:in) / Wang, Xiao-Feng (Autor:in) / Liu, Jiao-Jiao (Autor:in) / Wu, Yue (Autor:in)
16.12.2012
9 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
| British Library Online Contents | 2014
| British Library Online Contents | 2012
| British Library Online Contents | 2014