Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
The wear and corrosion resistance of shot peened–nitrided 316L austenitic stainless steel
Research highlights ► Shot peening-nitriding increased the wear resistance and surface hardness of samples. ► This treatment improved the surface mechanical properties. ► Shot peening alleviates the adverse effects of nitriding on the corrosion behavior.
Abstract 316L austenitic stainless steel was gas nitrided at 570°C with pre-shot peening. Shot peening and nitriding are surface treatments that enhance the mechanical properties of surface layers by inducing compressive residual stresses and formation of hard phases, respectively. The structural phases, micro-hardness, wear behavior and corrosion resistance of specimens were investigated by X-ray diffraction, Vickers micro-hardness, wear testing, scanning electron microscopy and cyclic polarization tests. The effects of shot peening on the nitride layer formation and corrosion resistance of specimens were studied. The results showed that shot peening enhanced the nitride layer formation. The shot peened–nitrided specimens had higher wear resistance and hardness than other specimens. On the other hand, although nitriding deteriorated the corrosion resistance of the specimens, cyclic polarization tests showed that shot peening before the nitriding treatment could alleviate this adverse effect.
The wear and corrosion resistance of shot peened–nitrided 316L austenitic stainless steel
Research highlights ► Shot peening-nitriding increased the wear resistance and surface hardness of samples. ► This treatment improved the surface mechanical properties. ► Shot peening alleviates the adverse effects of nitriding on the corrosion behavior.
Abstract 316L austenitic stainless steel was gas nitrided at 570°C with pre-shot peening. Shot peening and nitriding are surface treatments that enhance the mechanical properties of surface layers by inducing compressive residual stresses and formation of hard phases, respectively. The structural phases, micro-hardness, wear behavior and corrosion resistance of specimens were investigated by X-ray diffraction, Vickers micro-hardness, wear testing, scanning electron microscopy and cyclic polarization tests. The effects of shot peening on the nitride layer formation and corrosion resistance of specimens were studied. The results showed that shot peening enhanced the nitride layer formation. The shot peened–nitrided specimens had higher wear resistance and hardness than other specimens. On the other hand, although nitriding deteriorated the corrosion resistance of the specimens, cyclic polarization tests showed that shot peening before the nitriding treatment could alleviate this adverse effect.
The wear and corrosion resistance of shot peened–nitrided 316L austenitic stainless steel
Hashemi, B. (Autor:in) / Rezaee Yazdi, M. (Autor:in) / Azar, V. (Autor:in)
11.02.2011
6 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
The wear and corrosion resistance of shot peened-nitrided 316L austenitic stainless steel
British Library Online Contents | 2011
|British Library Online Contents | 2006
|British Library Online Contents | 2014
|Fatigue Threshold of Nitrided and Shot Peened Specimens
British Library Online Contents | 2006
|Evaluation of the corrosion resistance of plasma nitrided austenitic stainless steel
British Library Online Contents | 2015
|