Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Method of lightweight aggregates production from waste-coal combustion ash
Manufacturing lightweight aggregate (LWA) by a sintering technique requires a delicate balance among three conditions: forming sufficient amount of molten liquid phase during sintering; reaching an appropriate viscosity for solid-liquid suspension; and emitting sufficient amount of gas that can be entrapped by the liquid phase to form pores. LWAs were made from low-calcium and high-calcium Waste Coal Combustion Ash (W-CCA) including fly ash and bottom ash. A mass fraction of at least 40% liquid phase for fly ash and 50% for bottom ash is required for a successful entrapment of emitted gaseous phases during sintering. Larger pores were observed in the microstructure of LWA samples made using high-calcium W-CCA in comparison to low-calcium W-CCA. This result was mainly attributed to the high-calcium samples forming liquid phases with lower viscosity values and emitting higher amounts of gaseous phase during sintering than did the low-calcium samples. The gaseous phase was generated by hematite reduction and anhydrite decomposition.
Method of lightweight aggregates production from waste-coal combustion ash
Manufacturing lightweight aggregate (LWA) by a sintering technique requires a delicate balance among three conditions: forming sufficient amount of molten liquid phase during sintering; reaching an appropriate viscosity for solid-liquid suspension; and emitting sufficient amount of gas that can be entrapped by the liquid phase to form pores. LWAs were made from low-calcium and high-calcium Waste Coal Combustion Ash (W-CCA) including fly ash and bottom ash. A mass fraction of at least 40% liquid phase for fly ash and 50% for bottom ash is required for a successful entrapment of emitted gaseous phases during sintering. Larger pores were observed in the microstructure of LWA samples made using high-calcium W-CCA in comparison to low-calcium W-CCA. This result was mainly attributed to the high-calcium samples forming liquid phases with lower viscosity values and emitting higher amounts of gaseous phase during sintering than did the low-calcium samples. The gaseous phase was generated by hematite reduction and anhydrite decomposition.
Method of lightweight aggregates production from waste-coal combustion ash
BALAPOUR MOHAMMAD (Autor:in) / FARNAM YAGHOOB (Autor:in) / HSUAN YICK GRACE (Autor:in)
31.05.2022
Patent
Elektronische Ressource
Englisch
IPC:
C04B
Kalk
,
LIME
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
| Europäisches Patentamt | 2024
Method of Lightweight Aggregates Production from Waste-Coal Combustion Ash
| Europäisches Patentamt | 2021
Method of lightweight aggregates production from waste-coal combustion ash
| Europäisches Patentamt | 2022
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
| Europäisches Patentamt | 2021
Lightweight Aggregates Produced from Waste-Coal Combustion Ash
| Europäisches Patentamt | 2023