Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Grout for closure of the demonstration vault at the US DOE Hanford Facility. Final report
The Waterways Experiment Station (WES) developed a grout to be used as a cold- (nonradioactive) cap or void-fill grout between the solidified low-level waste and the cover blocks of a demonstration vault for disposal of phosphate-sulfate waste (PSW) at the US Department of Energy (DOE) Hanford Facility. The project consisted of formulation and evaluation of candidate grouts and selection of the best candidate grout, followed by a physical scale-model test to verify grout performance under project-specific conditions. Further, the project provided data to verify numerical models (accomplished elsewhere) of stresses and isotherms inside the Hanford demonstration vault. Evaluation of unhardened grout included obtaining data on segregation, bleeding, flow, and working time. For hardened grout, strength, volume stability, temperature rise, and chemical compatibility with surrogate wasteform grout were examined. The grout was formulated to accommodate unique environmental boundary conditions (vault temperature = 45 C) and exacting regulatory requirements (mandating less than 0.1% shrinkage with no expansion and no bleeding); and to remain pumpable for a minimum of 2 hr. A grout consisting of API Class H oil-well cement, an ASTM C 618 Class F fly ash, sodium bentonite clay, and a natural sand from the Hanford area met performance requirements in laboratory studies. It is recommended for use in the DOE Hanford demonstration PSW vault.
Grout for closure of the demonstration vault at the US DOE Hanford Facility. Final report
The Waterways Experiment Station (WES) developed a grout to be used as a cold- (nonradioactive) cap or void-fill grout between the solidified low-level waste and the cover blocks of a demonstration vault for disposal of phosphate-sulfate waste (PSW) at the US Department of Energy (DOE) Hanford Facility. The project consisted of formulation and evaluation of candidate grouts and selection of the best candidate grout, followed by a physical scale-model test to verify grout performance under project-specific conditions. Further, the project provided data to verify numerical models (accomplished elsewhere) of stresses and isotherms inside the Hanford demonstration vault. Evaluation of unhardened grout included obtaining data on segregation, bleeding, flow, and working time. For hardened grout, strength, volume stability, temperature rise, and chemical compatibility with surrogate wasteform grout were examined. The grout was formulated to accommodate unique environmental boundary conditions (vault temperature = 45 C) and exacting regulatory requirements (mandating less than 0.1% shrinkage with no expansion and no bleeding); and to remain pumpable for a minimum of 2 hr. A grout consisting of API Class H oil-well cement, an ASTM C 618 Class F fly ash, sodium bentonite clay, and a natural sand from the Hanford area met performance requirements in laboratory studies. It is recommended for use in the DOE Hanford demonstration PSW vault.
Grout for closure of the demonstration vault at the US DOE Hanford Facility. Final report
L. D. Wakeley (Autor:in) / J. J. Ernzen (Autor:in)
1992
157 pages
Report
Keine Angabe
Englisch
Radioactive Wastes & Radioactivity , Radiation Pollution & Control , Hanford Reservation , Radioactive Waste Facilities , Sealing Materials , Chemical Composition , Compression Strength , Density , Experimental Data , Fly Ash , Formation Heat , Grouting , Low-Level Radioactive Wastes , Mechanical Properties , Particle Size , Permeability , Phosphates , Physical Properties , Progress Report , Radioactive Waste Disposal , Rheology , Sulfates , Surface Area , Thermal Expansion , Waste Product Utilization , EDB/052002 , EDB/360603 , EDB/360606