Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Ultimate Deflection Response of Lightly Reinforced Concrete Intake Towers
The overall objective of this research is to understand the nonlinear response of existing, lightly reinforced intake towers. The ultimate objective is the evaluation and/or development of approximate or simplified analysis procedures for the evaluation of the ductility of existing intake towers. There were three phases in the fulfillment of this ultimate objective. The first phase was a statistical analysis of the inventory of existing intake towers. The specific objective of this tower inventory analysis was to quantify the distribution and variation of the structural characteristics of the U.S. Army Corps of Engineers' inventory of existing intake towers as relating to their earthquake location hazard. This analysis was used to assist in the identification of possible failure mechanisms to help quantify the extent of the problem of the seismic response of existing towers. The information generated was used in planning the second phase of this research effort, the Intake Tower Substructure (ITS) experimentation series conducted in 1996 and 1997. The objectives of these experiments were to observe the response of scale models of typical intake towers, quantify the ductility available, and use the information generated for the development of approximate and/or simplified analysis procedures for the evaluation of the ductility of existing intake towers. The most important finding was that the crack width in the failure zone is largely controlled by the steel rupture strain. Steel rupture strain is well understood and usually easy to obtain. In summary, we now have a deflection-based analysis procedure. However, the rotational spring model needs further development and the procedure must be verified for dynamic response and perhaps for larger bar sizes. It is recommended that further experimental and analytical work address these concerns.
Ultimate Deflection Response of Lightly Reinforced Concrete Intake Towers
The overall objective of this research is to understand the nonlinear response of existing, lightly reinforced intake towers. The ultimate objective is the evaluation and/or development of approximate or simplified analysis procedures for the evaluation of the ductility of existing intake towers. There were three phases in the fulfillment of this ultimate objective. The first phase was a statistical analysis of the inventory of existing intake towers. The specific objective of this tower inventory analysis was to quantify the distribution and variation of the structural characteristics of the U.S. Army Corps of Engineers' inventory of existing intake towers as relating to their earthquake location hazard. This analysis was used to assist in the identification of possible failure mechanisms to help quantify the extent of the problem of the seismic response of existing towers. The information generated was used in planning the second phase of this research effort, the Intake Tower Substructure (ITS) experimentation series conducted in 1996 and 1997. The objectives of these experiments were to observe the response of scale models of typical intake towers, quantify the ductility available, and use the information generated for the development of approximate and/or simplified analysis procedures for the evaluation of the ductility of existing intake towers. The most important finding was that the crack width in the failure zone is largely controlled by the steel rupture strain. Steel rupture strain is well understood and usually easy to obtain. In summary, we now have a deflection-based analysis procedure. However, the rotational spring model needs further development and the procedure must be verified for dynamic response and perhaps for larger bar sizes. It is recommended that further experimental and analytical work address these concerns.
Ultimate Deflection Response of Lightly Reinforced Concrete Intake Towers
R. C. Dove (Autor:in)
2000
127 pages
Report
Keine Angabe
Englisch
Ultimate Deflection Capacity of Lightly Reinforced Concrete Intake Towers
| Online Contents | 2005
Discussion - Ultimate Deflection Capacity of Lightly Reinforced Concrete intake Towers
| Online Contents | 2006
Ultimate strength and cracking resistance of lightly reinforced beams
| Engineering Index Backfile | 1953
| Engineering Index Backfile | 1907