Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Injected Polyurethane Slab Jacking
Conventional methods for raising in-place concrete slabs to align roadway sections or to conteract subsidence requires pressure-injecting grout under the slab. As other transportation organizations have had success with the URETEK Method, which utilizes injected polyurethane, Oregon DOT elected use of this method to raise and stabilize a bridge end panel and adjacent concrete slab. A two-year project was initiated to monitor the stability of the injected slabs and to evaluate the material. Benchmark elevation measurements were made for comparison with future elevation data. Density and strength of the polyurethane material was documented and will be compared to similar measurements after approximately 22 months of underground exposure. The ability of the injected polyurethane to penetrate through holes was characterized. An attempt was made to measure the water permeability of the material.
Injected Polyurethane Slab Jacking
Conventional methods for raising in-place concrete slabs to align roadway sections or to conteract subsidence requires pressure-injecting grout under the slab. As other transportation organizations have had success with the URETEK Method, which utilizes injected polyurethane, Oregon DOT elected use of this method to raise and stabilize a bridge end panel and adjacent concrete slab. A two-year project was initiated to monitor the stability of the injected slabs and to evaluate the material. Benchmark elevation measurements were made for comparison with future elevation data. Density and strength of the polyurethane material was documented and will be compared to similar measurements after approximately 22 months of underground exposure. The ability of the injected polyurethane to penetrate through holes was characterized. An attempt was made to measure the water permeability of the material.
Injected Polyurethane Slab Jacking
2000
30 pages
Report
Keine Angabe
Englisch
Injected Polyurethane Slab Jacking, Final Report
| NTIS | 2002
Jacking device and slab culvert reinforcing method adopting jacking device
| Europäisches Patentamt | 2022